🖤 BF20 FOR 20% OFF, NO MINIMUM SPEND · BF30 FOR 30% OFF, MIN $200 SPEND 🖤

Chrysler Neon Wiper Blade Sizes

This guide is here to help you find the right windscreen wiper blades for your Chrysler Neon. It is written for everyday car owners who just want clear vision in the rain without wrestling with confusing part numbers or jargon. We cover the two generations of the Neon and give you the driver side and passenger side sizes for each one.

The Neon was built across two generations, and the wiper sizes can differ between them. That is why it pays to know exactly which generation you have before you buy. This guide lists each generation in turn, so you can match your car to the right set of blades.

Use the guide by first working out which generation your Neon belongs to. Then look up the driver side and passenger side sizes for that generation. Take a moment to check your wiper arms and how your current blades attach. If anything looks worn or unclear, it is worth a second look before you order.

Chrysler Neon wiper sizes for each generation

Chrysler Neon 1999-2001 (2nd Gen)

Chrysler Neon 1999-2001 (2nd Gen) wiper blades
Driver side21″525 mm
Passenger side17″425 mm

Hook-style arm. Your wiper arm uses a hook-type connector, and the blade supplied is made for it.

Shop 1999-2001 (2nd Gen) wiper blades

For the 1999-2001 second generation Neon, the driver side blade is 21 inch (525 mm) and the passenger side blade is 17 inch (425 mm). These two sizes are different, so fit the longer blade to the driver side and the shorter one to the passenger side. Before fitting, lift the arm gently and check that the old blade comes away cleanly from the hook. Take your time and make sure each blade clicks into place securely.

Chrysler Neon 1996-1999 (1st Gen)

Chrysler Neon 1996-1999 (1st Gen) wiper blades
Driver side21″525 mm
Passenger side17″425 mm

Hook-style arm. Your wiper arm uses a hook-type connector, and the blade supplied is made for it.

Shop 1996-1999 (1st Gen) wiper blades

For the 1996-1999 first generation Neon, you need a 21 inch (525 mm) blade for the driver side and a 17 inch (425 mm) blade for the passenger side. Keep the two blades separate as you unpack them so the longer one goes on the driver side. When fitting, hold the arm steady and guide the blade onto the hook until it sits flush. Give each blade a gentle tug to confirm it is held firmly before you lower the arm.

How to work out which Chrysler Neon you have

Start by working out which generation of Chrysler Neon you own. The years tell you: the 1996-1999 cars are the first generation, and the 1999-2001 cars are the second generation. If you are unsure, check your registration papers or the plate on the car. Once you know the generation, you can look up the correct sizes with confidence.

Next, match each side separately. The driver side and passenger side take different sizes, so do not simply buy two of the same blade. Fit the longer blade to the driver side and the shorter blade to the passenger side. It also helps to look at how your current blades attach to the arm, so you know what you are working with before you start.

How to fit your new wiper blades

Hook-style arm

The end of your wiper arm is a curved hook, and the blade clips onto it.

  1. Lift the wiper arm away from the windscreen until it stays upright.
  2. Press the small release tab on the blade connector and slide the blade down and off the hook.
  3. Slide the new blade onto the hook until it clicks into place.
  4. Gently lower the arm back onto the glass.

When to replace your wiper blades

Worn wiper blades show themselves in small ways at first. You might see streaks of water left behind after each sweep, or a smear that makes the glass harder to see through. Sometimes the blades squeak or judder across the windscreen. These are all signs that the rubber is no longer doing its job properly.

Take a close look at the rubber itself. If it is split, cracked, or starting to come away from the blade, it needs replacing. A blade that leaves patches of water or skips across the glass is not clearing your view. Poor visibility in rain is dangerous, so do not put off a replacement once you notice these signs.

Clear vision matters for safe driving. Rain, spray from other cars, and low light all make it harder to see the road ahead. Blades that streak or smear leave you guessing about what is in front of you. Replacing worn blades is a simple job that makes a real difference to how safely you can drive.

Looking after your wipers

Look after your wipers and they will look after you. Clean the glass regularly, as dirt and film on the windscreen wear the rubber down faster. Wipe the blades themselves with a damp cloth now and then to remove grit. Sun and dust both take a toll on the rubber over time, so a little care goes a long way.

When you wash the car, lift the arms off the glass gently so you can clean underneath. Do not let the arm snap back down onto the glass, as that can damage the blade. Check your washer fluid too, so you can clear the screen when you need to. A quick check now and then keeps your wipers working well.

Wiper blade tips

  • Check which generation your Neon is before you buy any blades.
  • Fit the longer blade to the driver side and the shorter one to the passenger side.
  • Wipe the glass and blades clean to help them last longer.
  • Lift the arm gently and never let it snap back onto the glass.
  • Replace blades as soon as you notice streaking or squeaking.
  • Keep your washer fluid topped up for clearer vision.

Frequently asked questions

How do I know which generation my Neon is?

The years tell you. Cars from 1996 to 1999 are the first generation, and cars from 1999 to 2001 are the second generation. Check your registration papers or the plate on the car if you are unsure which one you have.

Are the driver and passenger blades the same size?

No. The driver side and passenger side take different sizes on both generations. Fit the longer blade to the driver side and the shorter blade to the passenger side. Buying two of the same size will not give you the right fit.

What size blade goes on the driver side?

On both generations of the Neon, the driver side blade is 21 inch (525 mm). Check your generation first, then match the blade to the driver side of your car.

What size blade goes on the passenger side?

On both generations of the Neon, the passenger side blade is 17 inch (425 mm). Keep it separate from the driver side blade when you fit them so each goes on the correct side.

How often should I replace my wiper blades?

Replace them when you notice the signs of wear. Streaking, smearing, squeaking, judder, or split and cracked rubber all mean it is time for new blades. Do not wait for a rainy day to find out your view is poor.

Can I fit the blades myself?

Yes, fitting wiper blades is a simple job you can do at home. Lift the arm gently, remove the old blade, and guide the new one on until it sits firmly. Give it a gentle tug to check it is secure before lowering the arm.

More Chrysler wiper blade sizes

If you can't find your car in the list, please scroll down to ensure you haven't missed it. If you're not 100% sure, select the option you think is closest. A photo of the car will be shown to help you confirm if it's the correct model. If you still can't find your car, please fill out the form below with your vehicle details and we'll respond shortly.

Enter valid email address!

Your name, Email Address and Correct Answer of QUIZ is required field!

Please do not use HTML tags.

Thank you for your inquiry. We will check and get back to you shortly.