Chrysler PT Cruiser Wiper Blade Sizes
This guide is for Chrysler PT Cruiser owners who want to get their windscreen wipers sorted without any guesswork. It covers the two PT Cruiser generations in our data and gives you the driver side, passenger side and, where fitted, rear wiper sizes for each one. You do not need to know anything about wipers to use it. Just find your generation, note the sizes, and you are ready to shop.
Wiper sizes differ between the PT Cruiser generations listed here. That means a blade that fits one generation may not fit another, so it is worth taking a moment to confirm which generation you have before you buy anything. The sizes below come straight from our fitment data, so you can trust them for the generation they belong to.
Start by working out which generation matches your car. Then read across to the driver side and passenger side sizes, and the rear size if your generation has one. Match each side to its own size rather than assuming both sides are the same. If anything about your car does not seem to match, check your generation again before ordering.
Chrysler PT Cruiser wiper sizes for each generation
Chrysler PT Cruiser 2006-2008 (PG PT) Convertible
Convertible.png)
Hook-style arm. Your wiper arm uses a hook-type connector, and the blade supplied is made for it.
Shop 2006-2008 (PG PT) Convertible wiper bladesFor the 2006-2008 (PG PT) Convertible, the driver side takes a 20 inch (500 mm) blade and the passenger side takes a 21 inch (525 mm) blade. These two sides are not the same size, so buy one of each rather than a matching pair. Before fitting, lay the new blades next to the old ones to confirm the lengths look right, then clip them on and give each a gentle tug to be sure it is seated.
Chrysler PT Cruiser 2000-2010 (PG PT) Wagon
Wagon.png)
Hook-style arm. Your wiper arm uses a hook-type connector, and the blade supplied is made for it.
Shop 2000-2010 (PG PT) Wagon wiper bladesFor the 2000-2010 (PG PT) Wagon, the driver side uses a 20 inch (500 mm) blade, the passenger side uses a 21 inch (525 mm) blade, and the rear uses a 16 inch (400 mm) blade. Keep each blade with its own position as you unpack them so nothing gets mixed up. When you fit them, press each one firmly onto its arm until it clicks or seats fully, then lift the arm away from the glass and let it settle back to check the fit.
How to work out which Chrysler PT Cruiser you have
To work out which generation you have, look at the body style of your PT Cruiser and compare it with the years listed above. The Convertible and the Wagon are listed separately, so match your car to the right one before you look at any sizes. If you are unsure, check your vehicle paperwork or the details on your registration, which will confirm the model and year.
Once you know your generation, note the driver side size and the passenger side size separately. They are different from each other, so treat them as two individual blades rather than a pair. If your generation lists a rear size, add that to your list too. Write the sizes down before you shop so you do not mix them up at the checkout.
How to fit your new wiper blades
Hook-style arm
The end of your wiper arm is a curved hook, and the blade clips onto it.
- Lift the wiper arm away from the windscreen until it stays upright.
- Press the small release tab on the blade connector and slide the blade down and off the hook.
- Slide the new blade onto the hook until it clicks into place.
- Gently lower the arm back onto the glass.
When to replace your wiper blades
Worn wiper blades show themselves in a few clear ways. You may see streaks of water left behind after each sweep, or a smear across the glass that makes it harder to see. Some blades squeak or judder as they move, which is a sign the rubber is no longer gripping the glass smoothly.
Look closely at the rubber edge as well. If it is split, cracked or coming away from the blade, it is time for a new one. A blade that leaves patches of the windscreen unwiped is also past its best. These signs tend to build up slowly, so it helps to check your blades now and then rather than waiting for a downpour.
Good visibility in rain matters for safe driving. Blades that streak or smear leave you squinting through a blurry windscreen, and that cuts down the time you have to react to what is ahead. Replacing worn blades is a small job that makes a real difference to how clearly you see the road.
Looking after your wipers
Look after your wipers and they will look after you. Clean the glass regularly, as dirt and film on the windscreen wear the rubber down faster. Wipe the blade edges with a damp cloth now and then to remove grit. Sun and dust are hard on rubber, so parking in shade where you can helps your blades last longer.
When you clean around the windscreen, lift the arms off the glass rather than forcing them sideways, and lower them gently afterwards. Check your washer fluid regularly too, so you can give the glass a quick clean when it needs it. A little routine care keeps your wipers working smoothly and quietly.
Wiper blade tips
- Check your generation before buying any blades.
- Buy the driver side and passenger side as separate sizes.
- Lay new blades beside old ones to compare length.
- Wipe the blade edges clean when you wash the car.
- Lift the arms gently and lower them softly.
- Replace blades at the first sign of streaking or squeaking.
Frequently asked questions
How do I know which PT Cruiser generation I have?
Compare your car's body style and year with the generations listed above. The Convertible and the Wagon are listed separately, so match your car to the right one. If you are unsure, your vehicle paperwork or registration details will confirm the model and year.
Are the driver and passenger blades the same size?
No. For both generations listed here, the driver side and passenger side take different sizes. Note each one separately and buy one blade of each size rather than a matching pair.
Does my PT Cruiser have a rear wiper?
The 2000-2010 (PG PT) Wagon lists a rear wiper size, so it has one. The 2006-2008 (PG PT) Convertible does not list a rear size, so there is no rear wiper to buy for that generation.
How often should I replace my wiper blades?
There is no set number in this guide. Instead, watch for the signs: streaking, smearing, squeaking, juddering, or split and cracked rubber. When you notice any of these, or your visibility in rain gets worse, it is time for new blades.
Can I fit the blades myself?
Yes, fitting wiper blades is a simple job. Clip or seat each blade onto its arm, then give it a gentle tug to check it is secure. Lift the arm away from the glass and let it settle back to confirm the blade sits properly.
What should I check before ordering?
Confirm your generation, then write down the driver side size, the passenger side size, and the rear size if your generation has one. Keep each size with its position so you order the right blade for the right spot.