🖤 BF20 FOR 20% OFF, NO MINIMUM SPEND · BF30 FOR 30% OFF, MIN $200 SPEND 🖤

Chrysler 300C Wiper Blade Sizes

This guide is for everyday Chrysler 300C owners who want to get their windscreen wipers sorted without any fuss. It covers the wiper blade sizes for each generation of the 300C, so you can walk into a shop or order online knowing exactly what fits your car. You do not need to know anything about wipers to use it. Just find your car, note the sizes, and you are ready to go.

Wiper sizes differ between generations of the 300C. That means a blade that fits one model year may not fit another. So it pays to check which generation you have before you buy anything. The sizes below are listed generation by generation, with the driver side and passenger side given for each. Take a moment to match your car to the right one.

Read through the generations and find the years that match your car. Note the driver side and passenger side sizes. Then check the wiper arm type shown for your generation, because that tells you how the blade attaches. If you are unsure, your car's build details will confirm the generation. Once you have your sizes, buying the right blades is simple.

Chrysler 300C wiper sizes for each generation

Chrysler 300C 2012-2023

Chrysler 300C 2012-2023 wiper blades
Driver side24″600 mm
Passenger side21″525 mm

Hook-style arm. Your wiper arm uses a hook-type connector, and the blade supplied is made for it.

Shop 2012-2023 wiper blades

For this generation, the driver side takes a 24 inch (600 mm) blade and the passenger side takes a 21 inch (525 mm) blade. These two sides are different sizes, so keep them separate when you buy and when you fit them. Before fitting, give the glass a wipe and make sure the new blade clicks firmly into place. A quick tug after fitting tells you it is secure.

Chrysler 300C 2006-2009 Wagon

Chrysler 300C 2006-2009 Wagon wiper blades
Driver side22″550 mm
Passenger side22″550 mm

Hook-style arm. Your wiper arm uses a hook-type connector, and the blade supplied is made for it.

Shop 2006-2009 Wagon wiper blades

This wagon generation uses a 22 inch (550 mm) blade on the driver side and a 22 inch (550 mm) blade on the passenger side. Both sides are the same size, which makes buying and fitting straightforward. Lay the old blades out and match them to the new ones before you start. Fit one side at a time and check each blade sits flush against the glass.

Chrysler 300C 2005-2011 Sedan

Chrysler 300C 2005-2011 Sedan wiper blades
Driver side22″550 mm
Passenger side22″550 mm

Hook-style arm. Your wiper arm uses a hook-type connector, and the blade supplied is made for it.

Shop 2005-2011 Sedan wiper blades

For the sedan of this era, the driver side takes a 22 inch (550 mm) blade and the passenger side also takes a 22 inch (550 mm) blade. With matching sizes on both sides, you can swap them over easily if you need to. Take care to seat each blade properly on the arm. A gentle press along the blade helps it settle evenly on the screen.

How to work out which Chrysler 300C you have

Start by working out which generation of 300C you have. The years listed for each generation are the simplest guide. If your car sits near a changeover year, check your build details to be sure. Getting the generation right matters, because the sizes differ between them. Once you know your generation, the rest is easy.

Next, match each side to the size given for your generation. Some generations use the same size on both sides, and one uses a different size on each. Say driver side and passenger side as you go, so you do not mix them up. Buy the correct size for each side, and check the arm type for your generation before fitting.

How to fit your new wiper blades

Hook-style arm

The end of your wiper arm is a curved hook, and the blade clips onto it.

  1. Lift the wiper arm away from the windscreen until it stays upright.
  2. Press the small release tab on the blade connector and slide the blade down and off the hook.
  3. Slide the new blade onto the hook until it clicks into place.
  4. Gently lower the arm back onto the glass.

When to replace your wiper blades

Worn wiper blades show themselves in small ways at first. You might see streaks across the glass, or patches the blade misses. Smearing is another sign, where the blade drags a film across the screen instead of clearing it. Squeaking or judder as the blade moves is a clear hint that the rubber has had enough. Split or cracked rubber means it is time to replace them.

Poor visibility in rain is the real risk. A blade that streaks or smears leaves you squinting through a messy screen when you most need to see clearly. That makes it harder to spot other cars, pedestrians and road markings. Replacing worn blades is a small job that makes a big difference to how safe you feel in wet weather.

Do not wait for a downpour to find out your blades are past their best. Check them now and then, and replace them when the signs appear. Fresh blades clear the glass cleanly and quietly. That gives you a clearer view and one less thing to worry about when the weather turns.

Looking after your wipers

Look after your wipers and they will look after you. Clean the glass regularly, because grime and dust wear the rubber down faster. Wipe the blade edges with a soft cloth now and then to lift off dirt. Strong sun and dusty roads both take a toll on rubber, so a little care goes a long way.

When you wash the car, lift the arms off the glass gently so you can clean underneath. Never let an arm snap back down onto the screen. Check your washer fluid too, so you can clear the glass when you need to. A quick check now and then keeps your wipers working well.

Wiper blade tips

  • Check which generation your 300C is before buying blades.
  • Match the size to each side, driver side and passenger side.
  • Check the wiper arm type for your generation before fitting.
  • Wipe the glass and blade edges to keep them clean.
  • Replace blades when they streak, smear or squeak.
  • Lift the arms gently and never let them snap back.

Frequently asked questions

How do I know which generation my 300C is?

Use the years listed for each generation as your guide. If your car is near a changeover year, check your build details to confirm. Getting this right means you buy the correct sizes for your car.

Are the driver side and passenger side always the same size?

No. Some generations use the same size on both sides, and one uses a different size on each. Always check the size for the driver side and the passenger side separately before you buy.

What does the wiper arm type tell me?

It tells you how the blade attaches to the arm. Check the arm type shown for your generation so you know the blade will fit. If in doubt, look at the end of your wiper arm.

How often should I replace my wiper blades?

Replace them when you notice the signs: streaking, smearing, squeaking, judder, or split and cracked rubber. Poor visibility in rain is a clear signal. Check them now and then rather than waiting for a storm.

Can I fit the blades myself?

Yes, it is a simple job. Fit one side at a time, seat each blade firmly, and give it a gentle tug to check it is secure. A quick press along the blade helps it settle on the glass.

Why do my new blades squeak?

Squeaking can come from dirt on the glass or on the blade edge. Clean both and check the blade is seated properly on the arm. If it continues, check the blade is the right size for that side.

More Chrysler wiper blade sizes

If you can't find your car in the list, please scroll down to ensure you haven't missed it. If you're not 100% sure, select the option you think is closest. A photo of the car will be shown to help you confirm if it's the correct model. If you still can't find your car, please fill out the form below with your vehicle details and we'll respond shortly.

Enter valid email address!

Your name, Email Address and Correct Answer of QUIZ is required field!

Please do not use HTML tags.

Thank you for your inquiry. We will check and get back to you shortly.