🖤 BF20 FOR 20% OFF, NO MINIMUM SPEND · BF30 FOR 30% OFF, MIN $200 SPEND 🖤

BYD SeaLion 7 Wiper Blade Sizes

This guide helps you find the right windscreen wiper blades for your BYD SeaLion 7. It is written for everyday car owners who want a simple, clear answer without any technical fuss. You do not need to know anything about wipers to use it. Just read the section that matches your car and you will have the sizes you need for each side of the windscreen.

Wiper sizes can differ between generations of the same model, so it is worth checking which generation you have before you buy. The sizes for the driver side and the passenger side are not always the same as each other either. Getting the correct size for each side means the blade will fit the arm properly and clear the glass well.

To use this guide, first work out which generation your SeaLion 7 belongs to. Then note the driver side and passenger side sizes for that generation. Match each side carefully when you buy, and check the arm type shown so you know how the blade releases. Take your time and you will get it right.

A little care when choosing and fitting your blades pays off. Fresh blades clear rain properly and help you see the road ahead. If you are ever unsure which generation you have, check your car's details before ordering so the blades fit first time.

BYD SeaLion 7 wiper sizes for each generation

BYD SeaLion 7 2024-2026

BYD SeaLion 7 2024-2026 wiper blades
Driver side26″650 mm
Passenger side17″425 mm

Push-button arm. Your wiper arm uses a push-button-type connector, and the blade supplied is made for it.

Shop 2024-2026 wiper blades

For this generation, the driver side blade is 26 inch (650 mm) and the passenger side blade is 17 inch (425 mm). These two sizes are different, so match each side separately when you buy. Before fitting, compare the new blade with the old one to confirm the length looks right. Take a moment to check the connector sits snugly on the arm before you lower it gently to the glass.

How to work out which BYD SeaLion 7 you have

Start by working out which generation your SeaLion 7 is. The year it was built is the simplest clue, and your registration or owner paperwork will usually confirm it. Once you know the generation, look up the driver side and passenger side sizes for that generation in this guide. Do not assume both sides are the same, because they often are not.

When you have the sizes, match each blade to its side as you buy. The driver side and passenger side take different lengths, so keep them separate until you fit them. Check the arm type shown so you know how the blade releases from the arm. If you are unsure, compare the new blade with the one you are removing before you start.

How to fit your new wiper blades

Push-button arm

The blade has a small push button that releases it from the end of your wiper arm.

  1. Lift the wiper arm away from the windscreen until it stays upright.
  2. Press and hold the push button on the blade connector, then slide the blade off the end of the arm.
  3. Slide the new blade on until the button clicks back into place.
  4. Gently lower the arm back onto the glass.

When to replace your wiper blades

Worn wiper blades show up in several ways. You may see streaks of water left behind after each sweep, or a smeary film that makes the glass harder to see through. Some blades squeak or judder across the glass. Others leave patches that never clear. Any of these signs means it is time to think about new blades.

Look closely at the rubber edge as well. Split, cracked or hardened rubber cannot wipe cleanly, and it may scratch or skip. If the blade looks frayed or feels stiff, it is past its best. Replacing worn blades is a simple job that makes a real difference to how well you can see.

Good visibility matters for safe driving, especially in heavy rain or spray from other vehicles. Blades that streak or smear can hide hazards and make judging distance harder. Do not wait for a downpour to find out your blades are tired. Check them regularly and replace them when they stop clearing the glass properly.

Looking after your wipers

Look after your wipers and they will serve you better. Clean the glass regularly so grit and grime do not wear the rubber edge. Wipe the blade edge with a damp cloth now and then to remove dust and dirt. Sun and dust both wear rubber over time, so a little cleaning goes a long way.

When you wash the car, lift the arms off the glass carefully rather than letting them snap back down. Check your washer fluid so you can clear the screen when you need to. Avoid running the wipers on a dry screen, as this wears the rubber faster. A few simple habits keep your blades working well for longer.

Wiper blade tips

  • Check which generation your SeaLion 7 is before you order any blades.
  • Match the driver side and passenger side sizes separately, as they differ.
  • Compare the new blade with the old one before fitting it.
  • Wipe the blade edge with a damp cloth to remove dust and grit.
  • Replace blades when they streak, smear or squeak across the glass.
  • Keep washer fluid topped up so you can clear the screen when needed.

Frequently asked questions

What size wiper blades does the BYD SeaLion 7 need?

For the 2024-2026 generation, the driver side blade is 26 inch (650 mm) and the passenger side blade is 17 inch (425 mm). The two sides take different sizes, so match each one separately when you buy.

Are the driver side and passenger side blades the same size?

No. On this generation the driver side and passenger side take different lengths. The driver side is 26 inch (650 mm) and the passenger side is 17 inch (425 mm). Always match each side to its own size.

How do I know which generation my SeaLion 7 is?

The year it was built is the simplest clue, and your registration or owner paperwork will usually confirm it. Once you know the generation, use the matching section of this guide for the driver side and passenger side sizes.

How does the blade release from the wiper arm?

This generation uses a push-button arm. The blade has a small push button that releases it from the end of your wiper arm. Press the button and ease the blade off, then fit the new one the same way.

How often should I replace my wiper blades?

There is no fixed number here. Replace them when you notice streaking, smearing, squeaking or judder, or when the rubber looks split or cracked. Check them regularly, especially before wet weather, and replace them once they stop clearing the glass well.

Can I fit the new blades myself?

Yes, fitting is usually straightforward. Compare the new blade with the old one first, then release the old blade using the push button on the arm. Ease the new blade into place and check it sits snugly before lowering the arm gently to the glass.

More BYD wiper blade sizes

If you can't find your car in the list, please scroll down to ensure you haven't missed it. If you're not 100% sure, select the option you think is closest. A photo of the car will be shown to help you confirm if it's the correct model. If you still can't find your car, please fill out the form below with your vehicle details and we'll respond shortly.

Enter valid email address!

Your name, Email Address and Correct Answer of QUIZ is required field!

Please do not use HTML tags.

Thank you for your inquiry. We will check and get back to you shortly.