BYD Sealion 5 Wiper Blade Sizes
This guide is for everyday BYD Sealion 5 owners who want to replace their windscreen wiper blades but are not sure what size to buy. It covers the wiper blade sizes for the Sealion 5 generation sold in Australia, so you can walk into a shop or order online with confidence. You do not need any technical knowledge to use it. Everything here is written in plain English, with the sizes laid out clearly for the driver side, the passenger side and the rear window.
Wiper blade sizes can differ between generations of the same model, so it is worth checking which generation your car is before you buy. The Sealion 5 covered here is the 2024-2027 generation. If your car falls outside those years, or you are unsure, check your owner's manual or the compliance plate before ordering. Getting the generation right means you get blades that fit properly and clear your windscreen well.
To use this guide, find your generation in the list below and note the driver side, passenger side and rear sizes. Then match each blade to the correct side of your car. The guide also explains how to work out which generation you have, when to replace worn blades, how to care for your wipers, and answers common questions. Read through the sections that apply to you and keep the sizes handy when you shop.
BYD Sealion 5 wiper sizes for each generation
BYD Sealion 5 2024-2027

Push-button arm. Your wiper arm uses a push-button-type connector, and the blade supplied is made for it.
Shop 2024-2027 wiper bladesFor the 2024-2027 BYD Sealion 5, the driver side blade is 24 inch (600 mm) and the passenger side blade is 18 inch (450 mm). The rear window takes a 10 inch (250 mm) blade. These are the sizes to look for when you buy replacements. Before fitting, compare the new blade with the old one to make sure the length and the connector match. Take your time and fit one side at a time so you do not mix up the driver and passenger blades.
How to work out which BYD Sealion 5 you have
First, work out which generation of Sealion 5 you own. The simplest way is to check the model year on your registration papers or the compliance plate, and compare it with the years listed in this guide. If your car is the 2024-2027 generation, the sizes above apply. If you are still unsure, your owner's manual or a quick check with your local parts shop will confirm it.
Once you know your generation, match each blade to the correct side. The driver side and passenger side are different sizes, so do not assume they are the same. Buy one blade for the driver side and one for the passenger side, and if your car has a rear wiper, add the rear blade too. Laying the old blades out as you remove them helps you keep track of which size goes where.
How to fit your new wiper blades
Push-button arm
The blade has a small push button that releases it from the end of your wiper arm.
- Lift the wiper arm away from the windscreen until it stays upright.
- Press and hold the push button on the blade connector, then slide the blade off the end of the arm.
- Slide the new blade on until the button clicks back into place.
- Gently lower the arm back onto the glass.
When to replace your wiper blades
Worn wiper blades show themselves in several ways. You may see streaks of water left behind after each sweep, or a smear across the glass that makes it harder to see. Some blades squeak or judder as they move, and others leave patches the blade has missed. These are all signs that the rubber has lost its edge and is no longer clearing the glass properly.
Look closely at the rubber itself. If it is split, cracked or torn, or if the edge looks ragged, it needs replacing. A blade that has lost chunks of rubber can scratch the glass or fail completely in heavy rain. Even if the blade looks fine, poor visibility in rain is a clear warning. If you find yourself squinting or slowing down more than usual when it rains, your blades are likely past their best.
Good wipers matter for safe driving. Clear glass lets you see the road, other cars, pedestrians and hazards, especially in sudden downpours or at night. Streaks and smears can hide things you need to see. Replacing worn blades is a small job that makes a real difference to your safety, so do not put it off once you notice the signs.
Looking after your wipers
Look after your wipers and they will last longer. Clean your windscreen regularly, as dust, bugs and grime wear down the rubber edge. Wipe the blade itself with a damp cloth now and then to remove grit. When you wash the car, give the glass and the blades a gentle clean. Avoid lifting the arms unnecessarily, and if you do lift them off the glass, lower them back carefully rather than letting them snap down.
Sun and dust are hard on wiper rubber. Parking in the shade when you can helps, and keeping the glass clean reduces wear. Check your washer fluid regularly and top it up so you can clear the screen when needed. If the blades start to streak or squeak, clean them first, and if that does not help, replace them. A little care goes a long way.
Wiper blade tips
- Check your model year before buying blades.
- Match the driver side and passenger side sizes separately.
- Replace both front blades at the same time.
- Clean the glass and blades to reduce wear.
- Lift the arm carefully and lower it gently.
- Top up washer fluid regularly.
Frequently asked questions
What size wiper blades does the BYD Sealion 5 use?
For the 2024-2027 generation, the driver side is 24 inch (600 mm), the passenger side is 18 inch (450 mm) and the rear is 10 inch (250 mm). Check your model year first, then match each blade to the correct side.
How do I know which generation of Sealion 5 I have?
Check the model year on your registration papers or compliance plate and compare it with the years in this guide. If it falls in the 2024-2027 range, the sizes here apply. Your owner's manual can also help confirm it.
Are the driver and passenger blades the same size?
No. The driver side and passenger side use different sizes, so buy each one separately. Do not assume they match. Fitting one side at a time helps you keep track of which blade goes where.
How often should I replace my wiper blades?
Replace them when you notice streaks, smears, squeaks or judder, or when the rubber is split or cracked. Poor visibility in rain is a clear sign. Check them regularly rather than waiting for a set date.
Can I fit the blades myself?
Yes, fitting wiper blades is a simple job for most owners. Take your time, fit one side at a time, and compare the new blade with the old one before fitting. If you are unsure, ask your local parts shop for help.
Why do my new blades squeak?
Squeaking can come from a dirty windscreen or grit on the blade. Clean the glass and wipe the blade with a damp cloth. If the noise continues, check that the blade is fitted correctly and seated properly on the arm.