🖤 BF20 FOR 20% OFF, NO MINIMUM SPEND · BF30 FOR 30% OFF, MIN $200 SPEND 🖤

BYD Atto 2 Wiper Blade Sizes

Welcome to your plain-English guide to windscreen wiper sizes for the BYD Atto 2. If you need to replace worn blades, this guide will help you find the right fit for your car. We cover the sizes for the driver side, passenger side, and rear wiper where applicable. Everything here is based on the information we have for this model, so you can shop with confidence.

Wiper sizes can differ between generations of the same car, so it is important to check which generation you have before buying new blades. For the BYD Atto 2, we list the sizes for each generation we know about. Using the correct size ensures the blade clears your windscreen properly and lasts as long as it should.

To use this guide, simply find the generation that matches your car's year range. Then note the driver side and passenger side sizes, and the rear size if your car has one. We also include tips on how to choose, when to replace, and how to care for your wipers. Just match the sizes to your car and you are ready to go.

BYD Atto 2 wiper sizes for each generation

BYD Atto 2 2024-2026

BYD Atto 2 2024-2026 wiper blades
Driver side24″600 mm
Passenger side19″475 mm
Rear11″275 mm

Push-button arm. Your wiper arm uses a push-button-type connector, and the blade supplied is made for it.

Shop 2024-2026 wiper blades

For the 2024-2026 BYD Atto 2, the driver side wiper blade is 24 inch (600 mm) and the passenger side is 19 inch (475 mm). This generation also has a rear wiper blade that is 11 inch (275 mm). When fitting new blades, make sure each one clicks securely into place on the arm. It is a good idea to check that the blade sits flat against the glass and moves smoothly across the windscreen.

How to work out which BYD Atto 2 you have

To work out which generation you have, check the year your car was made. The generation listed here covers 2024 to 2026. If your car falls outside that range, it may be a different generation, so double-check before ordering. You can find the year on your registration papers or on the compliance plate under the bonnet. If you are still unsure, look at the shape of your wiper arm or ask your mechanic.

Once you know your generation, match each side separately. The driver side and passenger side often need different lengths, so don't assume they are the same. For the 2024-2026 Atto 2, the driver side takes a 24 inch (600 mm) blade and the passenger side takes a 19 inch (475 mm) blade. If your car has a rear wiper, it takes an 11 inch (275 mm) blade. Always double-check the sizes against your old blades before fitting new ones.

How to fit your new wiper blades

Push-button arm

The blade has a small push button that releases it from the end of your wiper arm.

  1. Lift the wiper arm away from the windscreen until it stays upright.
  2. Press and hold the push button on the blade connector, then slide the blade off the end of the arm.
  3. Slide the new blade on until the button clicks back into place.
  4. Gently lower the arm back onto the glass.

When to replace your wiper blades

Wiper blades wear out over time, and there are clear signs to look for. If you see streaks or smears left on the windscreen after the wipers pass, the rubber may be worn. Squeaking or juddering as the blade moves across the glass is another common sign. You might also notice the blade chattering or skipping. These are all clues that the blades are no longer doing their job properly.

Another sign is visible damage to the rubber itself. Look for splits, cracks, or missing pieces along the edge of the blade. Sometimes the rubber can become hard or brittle, especially after exposure to sun and dust. If the blade looks worn or feels stiff, it is time for a replacement. Even if the damage seems small, it can affect how well the blade clears water.

Why does this matter? Good visibility is essential for safe driving, especially in rain. Worn blades can leave parts of the windscreen unclear, making it harder to see the road, other cars, and pedestrians. Replacing worn blades is a simple job that makes a big difference to your safety. Don't wait until a storm catches you out; check your blades regularly and replace them when needed.

Looking after your wipers

Looking after your wipers is easy and helps them last longer. Clean the windscreen regularly to remove dirt, dust, and insects. Use a proper glass cleaner and a soft cloth. Also wipe the rubber edge of the blade with a damp cloth to remove grit. This prevents the blade from dragging dirt across the glass, which can cause smearing and wear out the rubber faster. Avoid using harsh chemicals on the blades.

Sun and dust can dry out and crack the rubber over time, so try to park in the shade when you can. When you wash your car, lift the wiper arms off the glass to clean underneath them. Be gentle when lifting the arms, and don't let them snap back onto the glass. Also, check your washer fluid regularly and top it up. A good washer fluid helps clear the screen and reduces strain on the blades.

Wiper blade tips

  • Check your wiper blades every few months for signs of wear.
  • Clean your windscreen and blades regularly to improve performance.
  • Replace blades in pairs if they are both worn, for even clearing.
  • Lift wiper arms carefully when cleaning to avoid damage.
  • Use washer fluid designed for your climate to help clear the screen.
  • If you notice streaking or squeaking, inspect the blades promptly.

Frequently asked questions

What size wiper blades does my BYD Atto 2 need?

For the 2024-2026 generation, the driver side takes a 24 inch (600 mm) blade, the passenger side takes a 19 inch (475 mm) blade, and the rear takes an 11 inch (275 mm) blade. Always double-check your car's year to confirm the generation.

How do I know which generation my BYD Atto 2 is?

Check the year your car was built. The generation in this guide covers 2024 to 2026. You can find the year on your registration or compliance plate. If your car is outside that range, it may be a different generation.

Can I use the same size blade on both sides?

No, the driver and passenger sides often need different sizes. For the 2024-2026 Atto 2, the driver side is 24 inch (600 mm) and the passenger side is 19 inch (475 mm). Always match each side separately.

How often should I replace my wiper blades?

There is no set time, but you should replace them when you notice streaking, smearing, squeaking, or visible damage like cracks or splits. Check them every few months, especially before rainy seasons, and replace as soon as performance drops.

What is the wiper arm type for the BYD Atto 2?

The 2024-2026 BYD Atto 2 uses a push-button arm. The blade has a small push button that releases it from the end of your wiper arm. This makes changing the blade straightforward.

Do I need to replace the rear wiper too?

If your car has a rear wiper, yes, it can wear out just like the front ones. The 2024-2026 Atto 2 uses an 11 inch (275 mm) rear blade. Check it for the same signs of wear and replace when needed.

More BYD wiper blade sizes

If you can't find your car in the list, please scroll down to ensure you haven't missed it. If you're not 100% sure, select the option you think is closest. A photo of the car will be shown to help you confirm if it's the correct model. If you still can't find your car, please fill out the form below with your vehicle details and we'll respond shortly.

Enter valid email address!

Your name, Email Address and Correct Answer of QUIZ is required field!

Please do not use HTML tags.

Thank you for your inquiry. We will check and get back to you shortly.