🖤 BF20 FOR 20% OFF, NO MINIMUM SPEND · BF30 FOR 30% OFF, MIN $200 SPEND 🖤

Citroen Xantia Wiper Blade Sizes

This guide is for everyday Citroen Xantia owners who want to replace their windscreen wiper blades but are not sure which sizes to buy. It covers the Xantia generation sold in Australia and gives you the driver side and passenger side sizes in both inches and millimetres. You do not need any technical knowledge to use it. Just read the details for your car and match the sizes to the blades you buy.

Wiper sizes can differ between generations of the same model, so it is important to check which generation you have before buying. The sizes in this guide apply only to the generation listed. If your car is a different generation, the blades may not fit. Always confirm the generation first, then use the sizes shown here for that generation.

To use this guide, find your generation in the list below. Note the driver side and passenger side sizes. Buy one blade in each size and fit them to the matching side. Check the wiper arm type shown so you know how the blade attaches. If anything is unclear, ask your local parts shop to confirm the sizes before you buy.

Citroen Xantia wiper sizes for each generation

Citroen Xantia 1997-2002

Citroen Xantia 1997-2002 wiper blades
Driver side22″550 mm
Passenger side20″500 mm

Hook-style arm. Your wiper arm uses a hook-type connector, and the blade supplied is made for it.

Shop 1997-2002 wiper blades

For this generation, the driver side blade is 22 inch (550 mm) and the passenger side blade is 20 inch (500 mm). These two sizes are different, so buy one blade of each and fit them to the correct side. Before fitting, lift the wiper arm away from the glass and check that the old blade comes off cleanly and the new one clicks into place securely. A quick check that both blades sit flat on the glass will help them clear the screen evenly.

How to work out which Citroen Xantia you have

Work out which generation you have by checking the year your Xantia was built or first sold. The generation in this guide covers 1997 to 2002. If your car falls in that range, use the sizes shown here. If you are unsure, look at your registration papers or ask a dealer to confirm the build year before you buy any blades.

Once you know your generation, match each side separately. The driver side and passenger side take different sizes, so do not buy two blades of the same length. Buy one blade in the driver side size and one in the passenger side size. Check the wiper arm type shown so you know how the blade attaches, then fit each blade to its matching side.

How to fit your new wiper blades

Hook-style arm

The end of your wiper arm is a curved hook, and the blade clips onto it.

  1. Lift the wiper arm away from the windscreen until it stays upright.
  2. Press the small release tab on the blade connector and slide the blade down and off the hook.
  3. Slide the new blade onto the hook until it clicks into place.
  4. Gently lower the arm back onto the glass.

When to replace your wiper blades

Worn wiper blades show clear signs. You may see streaks of water left across the glass, smears that blur your view, or patches the blade misses entirely. Some blades squeak or judder as they move. The rubber may look split, cracked or ragged along the edge. If you notice any of these, the blades are ready to be replaced.

These signs matter because wipers are part of how you see the road in rain. Streaks and smears reduce visibility and make it harder to spot other cars, pedestrians or hazards. Squeaking and juddering can be distracting. Split or cracked rubber can scratch the glass or fail when you need it most. Replacing worn blades keeps your view clear in wet weather.

Do not wait for a heavy downpour to find out your blades are worn. Check them regularly, especially before wet seasons. If the rubber looks tired or the blades leave marks, fit new ones. Good blades help you drive safely and confidently when it rains, and they protect your windscreen from unnecessary wear.

Looking after your wipers

Look after your wipers by keeping the glass clean. Dirt and grit on the windscreen wear the rubber edge faster. Wipe the blades with a damp cloth now and then to remove dust and grime. Sun and dust also dry out and wear the rubber over time, so park in shade where you can. Clean glass and clean blades help the wipers clear the screen smoothly.

When you wash the car, lift the wiper arms off the glass to clean underneath them. Do not let the arms snap back down, as this can damage the glass or the blades. Check your washer fluid regularly and top it up so you can clear the screen when needed. These small habits keep your wipers working well for longer.

Wiper blade tips

  • Check your build year to confirm the generation before buying blades.
  • Buy one driver side blade and one passenger side blade in the sizes shown.
  • Lift the wiper arm carefully and let it down gently, never let it snap.
  • Wipe the blades and glass clean to reduce wear from dust and grit.
  • Replace blades at the first sign of streaking, smearing or squeaking.
  • Keep washer fluid topped up so you can clear the screen quickly.

Frequently asked questions

What size wiper blades does my Citroen Xantia need?

For the 1997 to 2002 generation, the driver side blade is 22 inch (550 mm) and the passenger side blade is 20 inch (500 mm). The two sides take different sizes, so buy one of each and fit them to the matching side.

Why are the driver and passenger blades different sizes?

The two sides of the windscreen are different shapes, so the blades are different lengths. Buy one blade in the driver side size and one in the passenger side size. Do not swap them or buy two of the same length.

How do I know which generation my Xantia is?

Check the year your car was built or first sold. This guide covers the 1997 to 2002 generation. If your car falls in that range, use the sizes shown. If you are unsure, check your registration papers or ask a dealer to confirm.

How do the blades attach to the wiper arm?

The wiper arm is a hook-style arm. The end of your wiper arm is a curved hook, and the blade clips onto it. When fitting, lift the arm off the glass and check that the new blade clicks into place securely before lowering it.

When should I replace my wiper blades?

Replace them when you see streaking, smearing or missed patches on the glass. Squeaking, juddering, or split and cracked rubber are also signs of wear. Do not wait for heavy rain. New blades keep your view clear and help you drive safely.

How can I make my wiper blades last longer?

Keep the glass and blades clean, and wipe off dust and grit. Park in shade where you can, because sun and dust wear the rubber. Lift the arms off the glass when cleaning and let them down gently. Check your washer fluid regularly and top it up when needed.

More Citroen wiper blade sizes

If you can't find your car in the list, please scroll down to ensure you haven't missed it. If you're not 100% sure, select the option you think is closest. A photo of the car will be shown to help you confirm if it's the correct model. If you still can't find your car, please fill out the form below with your vehicle details and we'll respond shortly.

Enter valid email address!

Your name, Email Address and Correct Answer of QUIZ is required field!

Please do not use HTML tags.

Thank you for your inquiry. We will check and get back to you shortly.