Citroen Berlingo Wiper Blade Sizes
This guide is for everyday Citroen Berlingo owners who want to replace their windscreen wiper blades but are not sure which sizes to buy. It covers the Berlingo generations listed here and sets out the driver side and passenger side sizes for each one, plus the rear size where the data gives one. You do not need any technical knowledge to use it. Just read through, find the generation that matches your van, and note the sizes.
Wiper sizes differ between Berlingo generations. The sizes also differ between the driver side and the passenger side on some generations, so it is worth checking each side separately rather than assuming both blades are the same. The data in this guide is grouped by generation, and each group lists its own sizes.
To use the guide, first work out which generation you have. Then look at the sizes listed for that generation. Match the driver side size to the driver side blade and the passenger side size to the passenger side blade. Where a rear size is given, that is the size for the rear wiper. Take your time and double-check before you buy.
Each generation below also shows the wiper arm type where the data provides one. The arm type tells you how the blade attaches to the arm, which matters when you fit the new blade. Read the arm description for your generation before you start. If you are unsure, look closely at the end of your wiper arm and compare it with the description.
A little care when choosing and fitting makes a real difference. New blades clear the glass better, which helps you see clearly in rain. Old, worn blades can streak, smear or squeak, and that can be distracting and unsafe. This guide keeps things simple so you can get the right blades and fit them with confidence.
Citroen Berlingo wiper sizes for each generation
Citroen Berlingo 2010-2023 (Series II) 2 Rear Doors

Push-button arm. Your wiper arm uses a push-button-type connector, and the blade supplied is made for it.
Shop 2010-2023 (Series II) 2 Rear Doors wiper bladesFor this generation, the driver side blade is 26 inch (650 mm) and the passenger side blade is 16 inch (400 mm). The rear blade is 14 inch (350 mm). The two front sizes are different, so buy each side to match its own size rather than assuming they are the same. Before fitting, lay the new blades next to the old ones to check the length looks right. Take your time and make sure each blade sits firmly on its arm before you lower it back to the glass.
Citroen Berlingo 1999-2009 (Series I) Rear Tailgate
RearTailgate.png)
Hook-style arm. Your wiper arm uses a hook-type connector, and the blade supplied is made for it.
Shop 1999-2009 (Series I) Rear Tailgate wiper bladesFor this generation, the driver side blade is 21 inch (525 mm) and the passenger side blade is 21 inch (525 mm), so both front sides take the same size. There is no rear size given for this generation in the data, so this guide does not cover a rear blade here. When you fit the new blades, check that each one clicks or clips securely onto its arm. Give each blade a gentle tug to confirm it is held firmly before you use the wipers.
Citroen Berlingo 1999-2009 (Series I) 2 Rear Doors
2RearDoors.png)
Hook-style arm. Your wiper arm uses a hook-type connector, and the blade supplied is made for it.
Shop 1999-2009 (Series I) 2 Rear Doors wiper bladesFor this generation, the driver side blade is 21 inch (525 mm) and the passenger side blade is 21 inch (525 mm), so the two front sides match. No rear size is given for this generation in the data, so no rear blade is covered here. Fit one side at a time so you do not mix up the blades. After fitting, lift each arm and lower it gently onto the glass, then check the blade sits flat along its length before you switch the wipers on.
How to work out which Citroen Berlingo you have
Start by working out which Berlingo generation you have. The years in each heading are the easiest clue, so check your van's year against them. The body style in the heading also helps, because some generations are listed with two rear doors and others with a rear tailgate. If two headings share the same years, look at the body style wording to tell them apart. When you are confident which heading matches your van, use the sizes listed under it.
Next, match each side separately. Read the driver side size and the passenger side size for your generation, and buy a blade for each. On some generations the two front sizes are the same, and on others they are different, so do not assume. Where a rear size is given, that is the size for the rear wiper. Check the wiper arm type shown for your generation too, so you know how the blade attaches before you fit it.
How to fit your new wiper blades
Hook-style arm
The end of your wiper arm is a curved hook, and the blade clips onto it.
- Lift the wiper arm away from the windscreen until it stays upright.
- Press the small release tab on the blade connector and slide the blade down and off the hook.
- Slide the new blade onto the hook until it clicks into place.
- Gently lower the arm back onto the glass.
Push-button arm
The blade has a small push button that releases it from the end of your wiper arm.
- Lift the wiper arm away from the windscreen until it stays upright.
- Press and hold the push button on the blade connector, then slide the blade off the end of the arm.
- Slide the new blade on until the button clicks back into place.
- Gently lower the arm back onto the glass.
When to replace your wiper blades
Worn wiper blades often leave streaks across the glass. You may see lines of water that the blade has missed, or patches that stay wet after each sweep. Smearing is another common sign, where the blade drags a film across the windscreen instead of clearing it cleanly. If you notice these things in rain, it is a good moment to think about new blades.
Squeaking and judder are also clues. A blade that squeaks as it moves, or that jumps and shudders across the glass, is often worn or damaged. Look closely at the rubber edge. If it is split, cracked or coming away, the blade will not clear the glass well. Replacing worn blades is a simple job that helps you see the road more clearly.
Good visibility in rain matters for safe driving. Blades that streak, smear or squeak can make it harder to see other cars, road markings and pedestrians. That is especially true in heavy rain or at night. If your blades are leaving the glass unclear, fit new ones so you can see properly and keep your attention on the road.
Looking after your wipers
Look after your wipers and they will serve you better. Clean the glass regularly so the blades are not dragging over dirt and grit. Wipe the rubber edge of each blade with a damp cloth now and then to remove dust and grime. Sun and dust wear rubber over time, so blades left in harsh conditions will not last as long. A little cleaning helps them clear the glass more evenly.
When you wash the van, lift the wiper arms off the glass so you can clean underneath them. Lower them gently afterwards rather than letting them snap back. Check your washer fluid regularly and top it up, because a good spray helps the blades work and keeps the glass clear. If a blade looks worn or damaged, replace it rather than waiting.
Wiper blade tips
- Check your van's year and body style to pick the right generation.
- Buy the driver side and passenger side blades to their own listed sizes.
- Lay new blades beside old ones to check the length before fitting.
- Make sure each blade is firmly attached to its arm before use.
- Clean the glass and the rubber edge to help blades clear better.
- Replace blades that streak, smear, squeak or have split rubber.
Frequently asked questions
How do I know which Berlingo generation I have?
Check your van's year against the years in each heading. Also look at the body style wording, such as two rear doors or rear tailgate. When both match your van, use the sizes listed under that heading. If you are unsure, compare the wiper arm on your van with the arm description shown.
Are the driver side and passenger side blades the same size?
It depends on the generation. On some generations both front sides take the same size, and on others they are different. Always read the driver side and passenger side sizes separately for your generation, and buy each blade to match its own side.
Does my Berlingo have a rear wiper?
Only some generations in this guide list a rear size. Where a rear size is given, that is the size for the rear wiper. Where no rear size is listed, this guide does not cover a rear blade for that generation. Check the sizes under your generation heading.
How do I fit the new blades?
Look at the wiper arm type shown for your generation, which tells you how the blade attaches. Fit one side at a time so you do not mix them up. Make sure each blade sits firmly on its arm, then lower the arm gently onto the glass and check it sits flat.
When should I replace my wiper blades?
Replace them when they streak, smear or squeak, or when the rubber is split or cracked. Poor visibility in rain is a clear sign. If the blades are not clearing the glass well, fit new ones so you can see the road properly, especially in heavy rain or at night.
How can I make my wiper blades last longer?
Clean the glass and wipe the rubber edge of each blade now and then. Sun and dust wear rubber over time, so keep the blades as clean as you can. Lift the arms off the glass when washing, lower them gently, and keep your washer fluid topped up.
More Citroen wiper blade sizes
- Citroen C2 Wiper Blade Sizes
- Citroen C3 Wiper Blade Sizes
- Citroen C4 Aircross Wiper Blade Sizes
- Citroen C4 Cactus Wiper Blade Sizes
- Citroen C4 Grand Picasso Wiper Blade Sizes
- Citroen C4 Picasso Wiper Blade Sizes
- Citroen C4 Wiper Blade Sizes
- Citroen C5 Wiper Blade Sizes
- Citroen DS4 Wiper Blade Sizes
- Citroen Xantia Wiper Blade Sizes