BMW Z4 Wiper Blade Sizes
This guide is for everyday BMW Z4 owners who want to replace their windscreen wiper blades without any fuss. It covers the three Z4 generations in the data, showing the driver side and passenger side blade sizes for each one. You do not need to know anything about wipers to use it. Just find your generation, note the sizes, and you are ready to shop.
The Z4 has been built in three generations, and the blade sizes differ between them. That means a blade that fits one generation may not fit another. The sizes also differ between the driver side and the passenger side on the same car, so each side needs its own match. Always check which generation you have before ordering anything.
Start by working out which generation your car is, using the years and the generation code shown for each one. Then read the driver side and passenger side sizes for that generation. Match each side separately when you buy. The notes on wiper arm type are shown alongside each generation so you can see how the blade attaches to your arm.
BMW Z4 wiper sizes for each generation
BMW Z4 2019-2026 (G29)

Push-button arm. Your wiper arm uses a push-button-type connector, and the blade supplied is made for it.
Shop 2019-2026 (G29) wiper bladesFor this generation, the driver side takes a 22 inch (550 mm) blade and the passenger side takes a 21 inch (525 mm) blade. These two sizes are close but not the same, so keep them apart when you fit them. Before you start, lay the new blades out and label each one for its side. Take your time and check the blade sits firmly on the arm before you lower it back to the glass.
BMW Z4 2010-2016 (E89)
.png)
Hook-style arm. Your wiper arm uses a hook-type connector, and the blade supplied is made for it.
Shop 2010-2016 (E89) wiper bladesThis generation uses a 22 inch (550 mm) blade on the driver side and a 20 inch (500 mm) blade on the passenger side. The difference between the two sides is easy to mix up, so fit one side at a time. Hold the arm steady while you work and keep a cloth handy to protect the glass. Once both blades are on, give each one a gentle tug to confirm it is secure.
BMW Z4 2003-2009 (E85 E86)

Hook-style arm. Your wiper arm uses a hook-type connector, and the blade supplied is made for it.
Shop 2003-2009 (E85 E86) wiper bladesHere the driver side needs a 21 inch (525 mm) blade and the passenger side needs a 20 inch (500 mm) blade. The two sizes are close, so double-check each blade against its side before fitting. Work on a flat surface and take care not to let the bare arm snap back onto the windscreen. After fitting, lower the arms gently and check both blades sit flat against the glass.
How to work out which BMW Z4 you have
To find your generation, look at the year your Z4 was built and compare it with the years listed for each generation. The generation code in brackets is a handy second check. If you are unsure, your car's paperwork or a quick look at the shape of the car will usually settle it. Once you know the generation, you can read off the correct sizes.
Then match each side on its own. The driver side and passenger side often take different lengths, so never assume one size fits both. Buy one blade for the driver side and one for the passenger side, checking each against the figures for your generation. If you are in any doubt, measure the blades currently on your car and compare them with the guide.
How to fit your new wiper blades
Hook-style arm
The end of your wiper arm is a curved hook, and the blade clips onto it.
- Lift the wiper arm away from the windscreen until it stays upright.
- Press the small release tab on the blade connector and slide the blade down and off the hook.
- Slide the new blade onto the hook until it clicks into place.
- Gently lower the arm back onto the glass.
Push-button arm
The blade has a small push button that releases it from the end of your wiper arm.
- Lift the wiper arm away from the windscreen until it stays upright.
- Press and hold the push button on the blade connector, then slide the blade off the end of the arm.
- Slide the new blade on until the button clicks back into place.
- Gently lower the arm back onto the glass.
When to replace your wiper blades
Worn wiper blades show themselves in small ways at first. You may see streaks of water left behind after each sweep, or patches the blade misses entirely. Smearing, where the glass looks greasy rather than clear, is another common sign. Squeaking or juddering as the blade moves across the glass also tells you the rubber is past its best.
Look closely at the blade itself. Split, cracked or hardened rubber cannot clear the glass properly, and a blade that has lost its edge will struggle in heavy rain. If you notice any of these signs, it is time for a new pair. Do not wait for a stormy day to find out your blades are worn.
Clear vision matters for safe driving. Rain, spray and grime all cut down what you can see, and tired blades make it worse. Replacing them when they first show signs of wear keeps your view clear and helps you react sooner. It is a small job that makes a real difference on wet roads.
Looking after your wipers
Look after your wipers and they will look after you. Clean the windscreen regularly, as dirt and film wear the rubber faster. Wipe the blade edges with a damp cloth now and then to remove grit. Sun and dust are hard on rubber, so park in the shade where you can. When you wash the car, give the blades a gentle clean too.
When you lift the arms off the glass, do it carefully and never let them snap back down. Check your washer fluid regularly so you can clear the screen when you need to. A little routine care keeps the blades working smoothly and helps them last.
Wiper blade tips
- Check your generation before you order any blades.
- Match the driver side and passenger side separately.
- Fit one blade at a time to avoid mixing them up.
- Wipe the glass and blade edges clean now and then.
- Replace blades at the first sign of streaking or squeaking.
- Lower the wiper arms gently, never let them snap back.
Frequently asked questions
How do I know which Z4 generation I have?
Compare the year your car was built with the years listed for each generation in this guide. The generation code in brackets is a useful second check. If you are still unsure, your car's paperwork will usually confirm it.
Are the driver and passenger blades the same size?
No. On every generation in this guide the two sides take different sizes. Always check the driver side and passenger side figures separately and buy a blade to match each one.
Can I use the same blades on a different Z4 generation?
Not reliably. The sizes differ between generations, so a blade that fits one may not fit another. Always match the blades to your own generation rather than assuming they carry over.
How often should I replace my wiper blades?
There is no fixed number here. Replace them when you notice streaking, smearing, squeaking or juddering, or when the rubber looks split or cracked. Those signs mean the blades are no longer clearing the glass well.
Why do my wipers squeak?
Squeaking usually means the rubber has hardened or the blade is not sitting flat on the glass. Cleaning the glass and the blade edges can help. If the noise continues, the blades are likely worn and ready to be replaced.
What should I check after fitting new blades?
Give each blade a gentle tug to confirm it is secure on the arm. Lower the arms gently onto the glass and check both blades sit flat. Then run the wipers and look for a clear, even sweep across the screen.
More BMW wiper blade sizes
- BMW 1 Series Wiper Blade Sizes
- BMW 2 Series Wiper Blade Sizes
- BMW 3 Series Wiper Blade Sizes
- BMW 6 Series Wiper Blade Sizes
- BMW 7 Series Wiper Blade Sizes
- BMW 8 Series Wiper Blade Sizes
- BMW M2 Wiper Blade Sizes
- BMW M3 Wiper Blade Sizes
- BMW M4 Wiper Blade Sizes
- BMW M6 Wiper Blade Sizes
- BMW M8 Wiper Blade Sizes
- BMW X1 Wiper Blade Sizes