BMW X6 Wiper Blade Sizes
This guide helps you find the right windscreen wiper blades for your BMW X6. It covers every generation in simple terms, so you can match the blades to your car with confidence. You do not need to know anything about wipers to use it. Just find your car's generation, then note the driver side and passenger side sizes.
Wiper sizes differ between generations of the X6. That means a blade that fits one model year may not fit another. Always check which generation your car is before buying. The years and the generation code in brackets are the easiest way to tell them apart.
Start by confirming your generation using the years or the code. Then read the driver side and passenger side sizes for that generation. Match each side separately, because the two sides are not always the same length. Take your time and double-check before you order.
BMW X6 wiper sizes for each generation
BMW X6 2019-2024 (G06)
.png)
Push-button arm. Your wiper arm uses a push-button-type connector, and the blade supplied is made for it.
Shop 2019-2024 (G06) wiper bladesFor this generation, the driver side takes a 26 inch (650 mm) blade and the passenger side takes a 20 inch (500 mm) blade. Fit each side to its own size rather than swapping them. Before you start, lift the wiper arm gently away from the glass so you have room to work. Take a moment to check the new blade sits firmly before you lower the arm back down.
BMW X6 2014-2019 (F16 F86)

Hook-style arm. Your wiper arm uses a hook-type connector, and the blade supplied is made for it.
Shop 2014-2019 (F16 F86) wiper bladesThis generation uses a 24 inch (600 mm) blade on the driver side and a 20 inch (500 mm) blade on the passenger side. Keep the two blades separate as you unpack them so you do not mix up the sizes. When fitting, let the arm rest naturally and guide the blade on without forcing it. Give each blade a gentle tug to confirm it is secure before you move to the other side.
BMW X6 2012-2014 (E71 Facelift)

Push-button arm. Your wiper arm uses a push-button-type connector, and the blade supplied is made for it.
Shop 2012-2014 (E71 Facelift) wiper bladesHere the driver side needs a 24 inch (600 mm) blade, while the passenger side needs a 19 inch (475 mm) blade. The two sides are different lengths, so match each one carefully. Lay a soft cloth on the glass under the arm in case anything slips. Once both blades are on, lower the arms slowly and check they sit flat against the windscreen.
BMW X6 2008-2012 (E71)

Pivot arm. Your wiper arm uses a pivot-style connector, and the blade supplied is made for it.
Shop 2008-2012 (E71) wiper bladesFor this generation, fit a 24 inch (600 mm) blade on the driver side and a 19 inch (475 mm) blade on the passenger side. Note the sizes down before you shop so you do not rely on memory. Handle the arms with care and avoid letting them snap back onto the glass. After fitting, run the wipers once and watch that both blades sweep cleanly.
How to work out which BMW X6 you have
First, work out which generation your X6 is. Look at the years your car was built, or find the generation code in brackets. The codes here are G06, F16 F86, E71 Facelift and E71. If you are unsure, check your car's paperwork or look for the code on the vehicle. Once you know the generation, you can read the correct sizes straight from this guide.
Next, match each side on its own. The driver side and passenger side often take different lengths, so treat them as two separate jobs. Write down the driver side size and the passenger side size for your generation before you order. This simple step stops you buying the wrong blade and saves a return trip.
How to fit your new wiper blades
Hook-style arm
The end of your wiper arm is a curved hook, and the blade clips onto it.
- Lift the wiper arm away from the windscreen until it stays upright.
- Press the small release tab on the blade connector and slide the blade down and off the hook.
- Slide the new blade onto the hook until it clicks into place.
- Gently lower the arm back onto the glass.
Push-button arm
The blade has a small push button that releases it from the end of your wiper arm.
- Lift the wiper arm away from the windscreen until it stays upright.
- Press and hold the push button on the blade connector, then slide the blade off the end of the arm.
- Slide the new blade on until the button clicks back into place.
- Gently lower the arm back onto the glass.
When to replace your wiper blades
Worn wiper blades show up in a few clear ways. You may see streaks of water left behind after each sweep. The glass might look smeared rather than clear. Some blades squeak or judder across the windscreen. Others leave patches that never quite clear.
Look closely at the rubber edge too. If it is split, cracked or coming away, the blade is past its best. A worn edge cannot press evenly on the glass, so it misses spots. Catching these signs early keeps your view sharp.
Good visibility matters for safe driving, especially in rain. Blades that streak or smear make it harder to see the road, other cars and pedestrians. Replacing worn blades is a small job that makes a real difference to how safely you can drive.
Looking after your wipers
Look after your wipers and they will look after you. Clean the glass regularly so grit and grime do not wear the rubber. Wipe the blade edges with a damp cloth now and then to remove dust. Sun and dust both wear rubber over time, so a little care goes a long way.
When you wash the car, lift the arms off the glass gently to clean underneath. Never let an arm snap back down, as that can damage the glass or the blade. Check your washer fluid too, so you can clear the screen when you need to. These small habits keep your wipers working well.
Wiper blade tips
- Check your generation before you buy any blades.
- Match the driver side and passenger side separately.
- Note both sizes down before you shop.
- Lift the arm gently and never let it snap back.
- Wipe the blade edges to remove dust and grit.
- Replace blades when they streak, smear or squeak.
Frequently asked questions
How do I know which generation my X6 is?
Check the years your car was built or find the generation code in brackets. The codes in this guide are G06, F16 F86, E71 Facelift and E71. Your car's paperwork can help if you are unsure. Once you know the generation, read the sizes for that row.
Are the driver side and passenger side the same size?
Not always. On every generation in this guide the two sides take different lengths. Always match each side to its own size. Treat them as two separate jobs so you do not mix them up.
What does the wiper arm type tell me?
It tells you how the blade attaches to your arm. Some arms use a push button and others use a hook. Knowing this helps you fit the blade correctly. Check the arm type shown for your generation before you start.
How often should I replace my wiper blades?
Replace them when you notice the signs of wear. Streaking, smearing, squeaking, judder or split rubber all mean it is time. Do not wait for a rainy day to find out. A clear view matters for safe driving.
Can I fit the blades myself?
Yes, fitting wiper blades is a simple job. Lift the arm gently, remove the old blade and fit the new one. Check it sits firmly before lowering the arm. Take care not to let the arm snap back onto the glass.
Why do my new blades still smear?
The glass may be dirty or greasy. Clean the windscreen well and wipe the blade edges. Check the blades are the right size for each side. If smearing continues, look closely at the rubber edge for damage.
More BMW wiper blade sizes
- BMW 1 Series Wiper Blade Sizes
- BMW 2 Series Wiper Blade Sizes
- BMW 3 Series Wiper Blade Sizes
- BMW 6 Series Wiper Blade Sizes
- BMW 7 Series Wiper Blade Sizes
- BMW 8 Series Wiper Blade Sizes
- BMW M2 Wiper Blade Sizes
- BMW M3 Wiper Blade Sizes
- BMW M4 Wiper Blade Sizes
- BMW M6 Wiper Blade Sizes
- BMW M8 Wiper Blade Sizes
- BMW X1 Wiper Blade Sizes