Audi S3 Wiper Blade Sizes
This guide helps you find the right windscreen wiper blades for your Audi S3. It covers every generation listed here, from the early 8L Hatch through to the latest GY models. You do not need to know anything about wipers to use it. Just match your car to the right generation, then note the driver side and passenger side sizes.
Wiper sizes differ between generations of the Audi S3. They also differ between body styles within the same generation. That is why it pays to check carefully rather than assume every S3 takes the same blades. Some generations also have a rear wiper, and where that is the case the rear size is given too.
Start by working out which generation and body style you have. Then read the driver side and passenger side sizes for that entry. Fit one blade at a time and match each side to its own size. If your car has a rear wiper, the rear size is listed as well. Take your time and check before you buy.
Audi S3 wiper sizes for each generation
Audi S3 2022-2026 (GY) Sedan

Fitting details for this arm are on the product page.
Shop 2022-2026 (GY) Sedan wiper bladesFor the GY Sedan, the driver side takes a 26 inch (650 mm) blade and the passenger side takes a 19 inch (475 mm) blade. This body style has no rear wiper listed. Before fitting, lay the new blades beside the old ones to confirm they match in length. Take care when lifting the arms away from the glass so they do not spring back down.
Audi S3 2022-2026 (GY) Hatch

Fitting details for this arm are on the product page.
Shop 2022-2026 (GY) Hatch wiper bladesThe GY Hatch uses a 26 inch (650 mm) blade on the driver side and a 19 inch (475 mm) blade on the passenger side. It also has a rear wiper that takes a 13 inch (325 mm) blade. Fit the front blades first, then the rear. Check that each blade clicks securely into place before you lower the arm back to the glass.
Audi S3 2014-2023 (8V) Cabriolet / Convertible
Cabriolet.png)
Push-button arm. The blade has a small push button that releases it from the end of your wiper arm.
Shop 2014-2023 (8V) Cabriolet / Convertible wiper bladesOn the 8V Cabriolet, the driver side needs a 26 inch (650 mm) blade and the passenger side needs an 18 inch (450 mm) blade. No rear wiper is listed for this body style. When changing the blades, hold the arm firmly with one hand while you release the old blade with the other. This keeps the arm from snapping back onto the windscreen.
Audi S3 2014-2021 (8V) Sedan

Push-button arm. The blade has a small push button that releases it from the end of your wiper arm.
Shop 2014-2021 (8V) Sedan wiper bladesThe 8V Sedan takes a 26 inch (650 mm) blade on the driver side and a 19 inch (475 mm) blade on the passenger side. There is no rear wiper listed for this body style. Before you start, note which blade came off which side so the new ones go on the same way. Run the wipers once afterwards to check they sit flat and clear the glass.
Audi S3 2013-2023 (8V) Hatch

Push-button arm. The blade has a small push button that releases it from the end of your wiper arm.
Shop 2013-2023 (8V) Hatch wiper bladesFor the 8V Hatch, fit a 26 inch (650 mm) blade on the driver side and an 18 inch (450 mm) blade on the passenger side. The rear wiper takes a 13 inch (325 mm) blade. Do the front pair first and the rear last. After fitting, switch the wipers on briefly and watch that each blade sweeps cleanly without catching.
Audi S3 2007-2013 (8P) Hatch
Hatch.png)
Fitting details for this arm are on the product page.
Shop 2007-2013 (8P) Hatch wiper bladesThe 8P Hatch uses a 24 inch (600 mm) blade on the driver side and a 19 inch (475 mm) blade on the passenger side. Its rear wiper takes a 13 inch (325 mm) blade. Check the new blades against the old ones before fitting so you are confident each one is the right length for its side. Then press each blade firmly onto the arm until it is seated.
Audi S3 1999-2004 (8L) Hatch
Hatch.png)
Hook-style arm. The end of your wiper arm is a curved hook, and the blade clips onto it.
Shop 1999-2004 (8L) Hatch wiper bladesOn the 8L Hatch, the driver side takes a 21 inch (525 mm) blade and the passenger side takes a 19 inch (475 mm) blade. The rear wiper uses a 15 inch (375 mm) blade. Take a moment to compare old and new blades side by side before you fit them. When you are done, lower each arm gently so the blade rests evenly on the glass.
How to work out which Audi S3 you have
To work out which generation you have, check the year your car was built and its body style. The entries above group cars by year range and by Sedan, Hatch or Cabriolet. Your registration papers or the plate under the bonnet can help confirm the details. If two entries overlap in years, the body style is the clue that tells them apart.
Once you know your generation, match each side separately. The driver side and passenger side often take different lengths, so treat them as two separate jobs. Buy the driver side blade to its listed size and the passenger side blade to its own size. If your car has a rear wiper, pick that size too. Never assume one blade fits both sides.
How to fit your new wiper blades
Hook-style arm
The end of your wiper arm is a curved hook, and the blade clips onto it.
- Lift the wiper arm away from the windscreen until it stays upright.
- Press the small release tab on the blade connector and slide the blade down and off the hook.
- Slide the new blade onto the hook until it clicks into place.
- Gently lower the arm back onto the glass.
Push-button arm
The blade has a small push button that releases it from the end of your wiper arm.
- Lift the wiper arm away from the windscreen until it stays upright.
- Press and hold the push button on the blade connector, then slide the blade off the end of the arm.
- Slide the new blade on until the button clicks back into place.
- Gently lower the arm back onto the glass.
When to replace your wiper blades
Worn wiper blades leave streaks across the glass instead of clearing it cleanly. You may see smears that dry in patches, or hear squeaking and judder as the blade drags. Look closely at the rubber edge: splits, cracks or a ragged finish all mean it is time for new blades. These signs usually build up slowly, so check your blades now and then.
Poor visibility in rain is the real risk. A blade that smears or skips leaves patches of water right where you need to see. That makes it harder to spot other cars, pedestrians and road markings. Replacing worn blades is a simple job that makes a real difference to how safely you can drive in wet weather.
Do not wait for a storm to notice. Check your blades on a dry day and again after rain. If the glass stays streaky after a few sweeps, or the blades chatter across the screen, fit new ones. Fresh blades clear the glass evenly and quietly, which helps you stay focused on the road ahead.
Looking after your wipers
Clean your windscreen regularly, inside and out, because dirt and film make blades work harder. Wipe the rubber edge of each blade with a damp cloth to remove grit and dust. Sun and dust wear rubber down over time, so a little cleaning now and then helps your blades last. Also check your washer fluid so you can clear the glass when you need to.
When you clean the glass, lift the wiper arms off the windscreen so you can reach underneath. Hold the arm while you do this so it does not spring back and crack the glass. Never let an arm snap down onto the screen. Put the arms back gently once you have finished, and check the blades sit flat against the glass.
Wiper blade tips
- Check your generation and body style before buying any blades.
- Match the driver side and passenger side to their own sizes.
- Fit one blade at a time and compare it with the old one.
- Hold the wiper arm when you lift it so it does not snap back.
- Wipe the rubber edge clean to remove grit and dust.
- Replace blades at the first sign of streaking or squeaking.
Frequently asked questions
How do I know which generation my Audi S3 is?
Check the year your car was built and its body style, such as Sedan, Hatch or Cabriolet. The entries in this guide group cars by year range and body style, so those two details will point you to the right one. Your registration papers can help confirm the year.
Are the driver side and passenger side blades the same size?
Not always. On every generation listed here the two sides take different lengths, so treat them as two separate blades. Buy the driver side blade to its listed size and the passenger side blade to its own size. Never assume one blade fits both sides.
Does my Audi S3 have a rear wiper?
Some body styles do and some do not. Where a rear wiper is listed, the rear size is given with that entry. If no rear size appears for your generation and body style, then no rear wiper is listed for it. Check your own car to be sure.
Why do the sizes differ between generations?
The sizes simply differ from one generation to the next, and they can also differ between body styles within the same generation. That is why it pays to match your car carefully rather than assume every S3 takes the same blades. Use the year range and body style to find your entry.
What are the signs that my wiper blades need replacing?
Watch for streaking, smearing, squeaking or judder as the blades sweep. Look at the rubber edge for splits or cracks. If the glass stays patchy after a few sweeps, or visibility in rain is poor, it is time for new blades. Fresh blades clear the glass evenly and quietly.
How should I look after my wiper blades?
Clean the glass and wipe the rubber edge of each blade with a damp cloth to remove grit and dust. Sun and dust wear rubber over time, so regular cleaning helps. Hold the arm when you lift it off the glass, and keep your washer fluid topped up.
More Audi wiper blade sizes
- Audi A1 Wiper Blade Sizes
- Audi A3 Wiper Blade Sizes
- Audi A4 Wiper Blade Sizes
- Audi A5 Wiper Blade Sizes
- Audi A6 Wiper Blade Sizes
- Audi A7 Wiper Blade Sizes
- Audi A8 Wiper Blade Sizes
- Audi Q2 Wiper Blade Sizes
- Audi Q3 Wiper Blade Sizes
- Audi Q4 e-tron Wiper Blade Sizes
- Audi Q5 Wiper Blade Sizes
- Audi Q7 Wiper Blade Sizes