Audi RS6 Wiper Blade Sizes
This guide helps you find the right windscreen wiper blades for your Audi RS6. It covers every generation listed here, from the early cars through to the latest wagon. You do not need to know anything about wipers to use it. Just match your car to the right generation, then note the driver side and passenger side sizes.
Wiper sizes differ between generations of the RS6. They also differ between the wagon and sedan body styles in some years. That is why it pays to check carefully before you buy. A blade that fits one generation may not fit another.
Start by working out which generation you have. Then look at the driver side and passenger side sizes for that generation. Where a rear size is given, you will see it too. Take your time, check both sides, and you will get the right fit.
Audi RS6 wiper sizes for each generation
Audi RS6 2020-2025 (C8) Wagon
Wagon.png)
Push-button arm. The blade has a small push button that releases it from the end of your wiper arm.
Shop 2020-2025 (C8) Wagon wiper bladesFor this generation, the driver side takes a 24 inch (600 mm) blade and the passenger side takes a 20 inch (500 mm) blade. The rear takes a 16 inch (400 mm) blade. Check the blade sits firmly on the arm before you drive off. It is worth confirming your car is this generation before ordering, as the sizes are specific to it.
Audi RS6 2013-2018 (C7) Wagon
Wagon.png)
Push-button arm. The blade has a small push button that releases it from the end of your wiper arm.
Shop 2013-2018 (C7) Wagon wiper bladesThis generation uses a 26 inch (650 mm) blade on the driver side and a 21 inch (525 mm) blade on the passenger side. The rear takes a 16 inch (400 mm) blade. Fit each blade carefully and give it a gentle tug to make sure it is secure. Take a moment to compare your car's details with this listing so you order with confidence.
Audi RS6 2008-2010 (C6) Wagon
Wagon.png)
Fitting details for this arm are on the product page.
Shop 2008-2010 (C6) Wagon wiper bladesHere the driver side and passenger side both take a 22 inch (550 mm) blade. The rear takes a 14 inch (350 mm) blade. When fitting, line the blade up squarely with the arm and press it home until it clicks into place. Double-check that your car is the wagon version, since the sedan is listed separately.
Audi RS6 2008-2010 (C6) Sedan
Sedan.png)
Fitting details for this arm are on the product page.
Shop 2008-2010 (C6) Sedan wiper bladesFor this sedan, the driver side and passenger side both take a 22 inch (550 mm) blade. There is no rear wiper listed for this generation. Check that both new blades sit flat against the glass before you rely on them. Confirm your car is the sedan rather than the wagon, as the two are listed as separate entries.
Audi RS6 2003-2004 (C5) Wagon
Wagon.png)
Fitting details for this arm are on the product page.
Shop 2003-2004 (C5) Wagon wiper bladesThis wagon takes a 22 inch (550 mm) blade on the driver side and a 22 inch (550 mm) blade on the passenger side. The rear takes a 15 inch (375 mm) blade. After fitting, lift each arm and let it settle back to check the blade follows the curve of the glass. Make sure your car matches this generation before ordering.
Audi RS6 2003-2004 (C5) Sedan
Sedan.png)
Fitting details for this arm are on the product page.
Shop 2003-2004 (C5) Sedan wiper bladesFor this sedan, the driver side and passenger side both take a 22 inch (550 mm) blade. There is no rear wiper listed for this generation. Take a moment to seat each blade properly on its arm and test it before driving. Check that your car is the sedan, as the wagon is covered in a separate entry with its own sizes.
How to work out which Audi RS6 you have
First, work out which generation your RS6 belongs to. The years in each entry are the simplest clue, but also note whether your car is a wagon or a sedan, because some years list both. If you are unsure, check your car's paperwork or look for the generation label in the entry that matches your model year.
Once you know your generation, note the driver side and passenger side sizes. They are not always the same, so match each side separately. Where a rear size is given, note that too. Buy one blade for each position and check them against the listing before you order.
How to fit your new wiper blades
Push-button arm
The blade has a small push button that releases it from the end of your wiper arm.
- Lift the wiper arm away from the windscreen until it stays upright.
- Press and hold the push button on the blade connector, then slide the blade off the end of the arm.
- Slide the new blade on until the button clicks back into place.
- Gently lower the arm back onto the glass.
When to replace your wiper blades
Worn wiper blades leave streaks and smears across the glass. You may hear squeaking or juddering as they move. Sometimes the rubber splits or cracks. Any of these signs means it is time for a new set.
Poor visibility in rain is a serious safety issue. Blades that do not clear the glass properly leave you guessing about the road ahead. Replacing them is a simple job that makes a real difference to how well you can see.
Do not wait for a storm to notice. Check your blades now and then, and replace them when they stop doing their job cleanly. Fresh blades give you a clearer view and more confidence behind the wheel.
Looking after your wipers
Keep the glass clean, as dirt and grit wear the rubber faster. Wipe the blades with a damp cloth now and then. Sun and dust also take their toll on rubber over time, so a little care goes a long way.
When you wash the car, lift the arms off the glass to clean underneath. Check your washer fluid regularly so you are never caught short. A clean screen and working washers help your blades last and keep your view clear.
Wiper blade tips
- Check your generation before you order any blades.
- Match the driver side and passenger side separately.
- Look for streaks, smears or squeaks as signs of wear.
- Wipe your blades and glass clean now and then.
- Lift the arms off the glass when washing the car.
- Keep your washer fluid topped up for a clear view.
Frequently asked questions
How do I know which generation my RS6 is?
Check the model year and whether your car is a wagon or a sedan. Compare that with the years and body style in each entry. If you are still unsure, your car's paperwork should help you confirm it.
Are the driver side and passenger side sizes always the same?
No. Some generations use different sizes on each side. Always check both the driver side and passenger side figures for your generation before ordering, so each blade fits properly.
Does my car have a rear wiper?
Only some generations list a rear size. If your generation's entry shows a rear size, your car has a rear wiper. If it does not, there is no rear wiper listed for that generation.
When should I replace my wiper blades?
Replace them when you see streaking, smearing or squeaking, or when the rubber looks split or cracked. Poor visibility in rain is a clear warning sign that new blades are needed.
How do I look after my wipers?
Keep the glass clean and wipe the blades now and then. Lift the arms off the glass when washing. Check your washer fluid regularly, and replace blades when they stop clearing the screen well.
What should I check after fitting new blades?
Make sure each blade sits firmly on its arm and lies flat against the glass. Give it a gentle tug, then test it. If it judders or streaks, check it is seated correctly.
More Audi wiper blade sizes
- Audi A1 Wiper Blade Sizes
- Audi A3 Wiper Blade Sizes
- Audi A4 Wiper Blade Sizes
- Audi A5 Wiper Blade Sizes
- Audi A6 Wiper Blade Sizes
- Audi A7 Wiper Blade Sizes
- Audi A8 Wiper Blade Sizes
- Audi Q2 Wiper Blade Sizes
- Audi Q3 Wiper Blade Sizes
- Audi Q4 e-tron Wiper Blade Sizes
- Audi Q5 Wiper Blade Sizes
- Audi Q7 Wiper Blade Sizes