Audi RS4 Wiper Blade Sizes
This guide helps you find the right wiper blades for your Audi RS4. It covers every generation in our data, from the early B5 Wagon through to the B9 Wagon. You do not need to know anything about wipers to use it. Just match your car to the right generation and note the sizes for each side.
Sizes differ between generations. The driver side, passenger side and rear blades are not the same across every model year. That is why it pays to check which generation you have before you buy. A blade that fits one generation may not fit another.
Start by finding your generation in the list below. Then read the driver side and passenger side sizes, and the rear size where one is given. Take your time and check each side separately. If you are unsure, check your car's details before ordering.
Audi RS4 wiper sizes for each generation
Audi RS4 2018-2023 (B9) Wagon
Wagon.png)
Push-button arm. The blade has a small push button that releases it from the end of your wiper arm.
Shop 2018-2023 (B9) Wagon wiper bladesFor this generation, the driver side takes a 24 inch (600 mm) blade and the passenger side takes a 20 inch (500 mm) blade. There is also a rear blade, which takes 14 inch (350 mm). Fit each blade to its own side and check it sits firmly before you drive. Take a moment to compare the old blade with the new one before fitting.
Audi RS4 2012-2015 (B8) Wagon
Wagon.png)
Push-button arm. The blade has a small push button that releases it from the end of your wiper arm.
Shop 2012-2015 (B8) Wagon wiper bladesThis generation uses a 24 inch (600 mm) blade on the driver side and a 20 inch (500 mm) blade on the passenger side. The rear takes a 16 inch (400 mm) blade. Line up the new blade with the old one before you clip it on, so you know you have the right part for that side.
Audi RS4 2007-2007 (B7) Cabriolet / Convertible

Fitting details for this arm are on the product page.
Shop 2007-2007 (B7) Cabriolet / Convertible wiper bladesHere the driver side and the passenger side both take a 22 inch (550 mm) blade. This generation has no rear wiper, so there is nothing to fit at the back. Fit one side at a time and give each blade a gentle tug to confirm it is secure before moving on.
Audi RS4 2006-2008 (B7) Wagon
Wagon.png)
Fitting details for this arm are on the product page.
Shop 2006-2008 (B7) Wagon wiper bladesFor this wagon, the driver side and the passenger side each take a 22 inch (550 mm) blade. There is no rear wiper on this generation. Check that both new blades match the length of the ones you removed, then press each one home until it clicks into place.
Audi RS4 2006-2008 (B7) Sedan
Sedan.png)
Fitting details for this arm are on the product page.
Shop 2006-2008 (B7) Sedan wiper bladesThis sedan uses a 22 inch (550 mm) blade on the driver side and a 22 inch (550 mm) blade on the passenger side. It has no rear wiper. Lay the new blade against the old one to compare length, then fit it carefully and make sure it sits flat against the glass.
Audi RS4 2000-2001 (B5) Wagon
Wagon.png)
Hook-style arm. The end of your wiper arm is a curved hook, and the blade clips onto it.
Shop 2000-2001 (B5) Wagon wiper bladesThis generation takes a 21 inch (525 mm) blade on the driver side and a 21 inch (525 mm) blade on the passenger side. The rear takes a 15 inch (375 mm) blade. Fit the front blades first, then the rear, and check each one is seated properly before you use them.
How to work out which Audi RS4 you have
To work out your generation, look at your car's model year and body style, such as wagon, sedan or cabriolet. Compare that with the years and names in the list above. Some generations share a year range, so the body style matters. Once you have found the match, you can read off the sizes.
Then match each side on its own. The driver side and passenger side can be different sizes, so do not assume they are the same. Where a rear size is given, note that too. Write the sizes down before you order so you can check them again when the blades arrive.
How to fit your new wiper blades
Hook-style arm
The end of your wiper arm is a curved hook, and the blade clips onto it.
- Lift the wiper arm away from the windscreen until it stays upright.
- Press the small release tab on the blade connector and slide the blade down and off the hook.
- Slide the new blade onto the hook until it clicks into place.
- Gently lower the arm back onto the glass.
Push-button arm
The blade has a small push button that releases it from the end of your wiper arm.
- Lift the wiper arm away from the windscreen until it stays upright.
- Press and hold the push button on the blade connector, then slide the blade off the end of the arm.
- Slide the new blade on until the button clicks back into place.
- Gently lower the arm back onto the glass.
When to replace your wiper blades
Worn blades leave streaks, smears or patches of water on the glass. You may hear squeaking or juddering as they move. The rubber can split or crack. If you notice any of these, it is time to think about new blades.
Poor visibility in rain is a safety issue. Blades that do not clear the glass properly make it harder to see the road, other cars and hazards. Replacing worn blades is a simple job that helps you see clearly when the weather turns.
Do not wait for a storm to find out your blades are past their best. Check them regularly and replace them when they stop doing a clean job. Fresh blades give you a clearer view and more confidence behind the wheel.
Looking after your wipers
Clean your glass and blades now and then to remove dust and grime. Sun and dust wear down the rubber over time. When you wash the car, wipe along the blade gently. Lifting the arms off the glass can help you clean underneath, but lower them carefully afterwards.
Keep an eye on your washer fluid so you can clear the screen when you need to. Do not let the blades run on a dry screen, as that wears the rubber. A little regular care helps your wipers last and keeps your view clear.
Wiper blade tips
- Check your model year and body style before ordering.
- Match the driver side and passenger side separately.
- Compare the old blade with the new one before fitting.
- Give each blade a gentle tug to check it is secure.
- Replace blades when they streak, squeak or smear.
- Keep the glass and blades clean for a clearer view.
Frequently asked questions
How do I know which generation my RS4 is?
Look at your car's model year and body style, such as wagon, sedan or cabriolet. Compare that with the years and names in the list above. The body style matters because some generations share a year range.
Are the driver and passenger blades the same size?
Not always. Some generations use different sizes on each side, while others use the same size on both. Check the driver side and passenger side separately in the list above before you order.
Does my RS4 have a rear wiper?
Only some generations in this guide have a rear wiper, and the rear size is given where it applies. If no rear size is shown for your generation, there is no rear wiper to fit.
When should I replace my wiper blades?
Replace them when they streak, smear, squeak or judder, or when the rubber is split or cracked. Poor visibility in rain is a sign they are worn. New blades help you see clearly.
Can I fit the blades myself?
Yes. Fit one side at a time and compare the new blade with the old one first. Make sure each blade sits firmly before you drive. Take care when lifting the arms off the glass.
How do I look after my wipers?
Clean the glass and blades now and then, and keep your washer fluid topped up. Sun and dust wear the rubber over time. Do not let the blades run on a dry screen.
More Audi wiper blade sizes
- Audi A1 Wiper Blade Sizes
- Audi A3 Wiper Blade Sizes
- Audi A4 Wiper Blade Sizes
- Audi A5 Wiper Blade Sizes
- Audi A6 Wiper Blade Sizes
- Audi A7 Wiper Blade Sizes
- Audi A8 Wiper Blade Sizes
- Audi Q2 Wiper Blade Sizes
- Audi Q3 Wiper Blade Sizes
- Audi Q4 e-tron Wiper Blade Sizes
- Audi Q5 Wiper Blade Sizes
- Audi Q7 Wiper Blade Sizes