🖤 BF20 FOR 20% OFF, NO MINIMUM SPEND · BF30 FOR 30% OFF, MIN $200 SPEND 🖤

Audi RS3 Wiper Blade Sizes

This guide helps you choose the right windscreen wiper blades for your Audi RS3. It covers all four generations and body styles, giving you the driver side and passenger side sizes, and the rear size where your car has one. We keep it simple and plain English, so you can get the right blades without any guesswork.

Sizes can differ between generations, so it is important to check which one you have. Even within the same generation, the hatch and sedan may use different sizes on one side. That is why we list each generation separately. Just match your car to the years and body style below.

To use this guide, find your generation by its years and body style. Then note the driver side and passenger side sizes. If your car has a rear wiper, we give that size too. Always double-check your current blades or your car's handbook if you are unsure. And remember, each side can be a different length, so match them individually.

Audi RS3 wiper sizes for each generation

Audi RS3 2022-2026 (GY) Sedan

Audi RS3 2022-2026 (GY) Sedan wiper blades
Driver side26″650 mm
Passenger side19″475 mm

Fitting details for this arm are on the product page.

Shop 2022-2026 (GY) Sedan wiper blades

For the 2022-2026 (GY) Sedan, the driver side takes a 26 inch (650 mm) blade and the passenger side takes a 19 inch (475 mm) blade. This sedan does not have a rear wiper, so you only need to worry about the front two. When fitting, make sure each blade clicks securely into place and lies flat against the glass. It is a good idea to lift the arm away from the windscreen gently before attaching the new blade, so you do not damage anything.

Audi RS3 2022-2026 (GY) Hatch

Audi RS3 2022-2026 (GY) Hatch wiper blades
Driver side26″650 mm
Passenger side19″475 mm
Rear13″325 mm

Fitting details for this arm are on the product page.

Shop 2022-2026 (GY) Hatch wiper blades

The 2022-2026 (GY) Hatch uses a 26 inch (650 mm) blade on the driver side and a 19 inch (475 mm) blade on the passenger side. It also has a rear wiper that takes a 13 inch (325 mm) blade. So you will need three blades in total. When changing them, take care to match each blade to the correct arm, and check that the rear blade is seated properly. A quick test with the washers will show if everything is working as it should.

Audi RS3 2015-2020 (8V) Sedan

Audi RS3 2015-2020 (8V) Sedan wiper blades
Driver side26″650 mm
Passenger side19″475 mm

Push-button arm. The blade has a small push button that releases it from the end of your wiper arm.

Shop 2015-2020 (8V) Sedan wiper blades

For the 2015-2020 (8V) Sedan, you need a 26 inch (650 mm) blade for the driver side and a 19 inch (475 mm) blade for the passenger side. There is no rear wiper on this sedan, so just the two front blades are required. Before you fit the new blades, it helps to note how the old ones sit on the glass, so you can copy that when you put the new ones on. Make sure they are firmly attached and clear the glass evenly.

Audi RS3 2015-2020 (8V) Hatch

Audi RS3 2015-2020 (8V) Hatch wiper blades
Driver side26″650 mm
Passenger side18″450 mm
Rear13″325 mm

Push-button arm. The blade has a small push button that releases it from the end of your wiper arm.

Shop 2015-2020 (8V) Hatch wiper blades

The 2015-2020 (8V) Hatch takes a 26 inch (650 mm) blade on the driver side and an 18 inch (450 mm) blade on the passenger side. It also has a rear wiper that uses a 13 inch (325 mm) blade. That means three blades to replace. When you change them, fit each blade carefully and check that the rear one is secure. A quick spray of the washer will confirm the blades are working and clearing the glass properly.

How to work out which Audi RS3 you have

First, work out which generation your Audi RS3 is. The generations are listed by year range and body style: 2022-2026 (GY) Sedan, 2022-2026 (GY) Hatch, 2015-2020 (8V) Sedan, and 2015-2020 (8V) Hatch. Check your car's build year and whether it is a sedan or a hatch. If you are unsure, look at your registration papers or the vehicle identification number. Once you know the generation, you can find the right sizes in the list above.

Next, match each side separately. The driver side and passenger side often take different lengths, so do not assume they are the same. For each generation, we give the exact size for each side. If your car has a rear wiper, we also give that size. Always compare the new blade to the old one before fitting, to avoid mixing them up. And remember, if your generation does not list a rear size, it does not have a rear wiper.

How to fit your new wiper blades

Push-button arm

The blade has a small push button that releases it from the end of your wiper arm.

  1. Lift the wiper arm away from the windscreen until it stays upright.
  2. Press and hold the push button on the blade connector, then slide the blade off the end of the arm.
  3. Slide the new blade on until the button clicks back into place.
  4. Gently lower the arm back onto the glass.

When to replace your wiper blades

Wiper blades wear out over time, and it is important to replace them when they stop doing their job well. Common signs include streaking, where the blade leaves lines of water across the windscreen, and smearing, where the glass looks blurry after a swipe. You might also hear squeaking or juddering as the blade moves. These are all clues that the rubber has lost its edge or hardened.

Another clear sign is visible damage to the rubber itself. Look for splits, cracks, or missing chunks along the edge of the blade. If the rubber looks worn or torn, it will not clear the glass properly. Also, if you notice poor visibility in rain, even with the wipers on, it is time for a change. Do not wait for a completely failed blade, as that can be dangerous.

Worn wipers are more than a nuisance; they affect your safety. Streaks and smears can obscure your view, especially in heavy rain or at night when glare is worse. Squeaking and juddering can be distracting, and a blade that does not clear the glass properly increases the risk of an accident. Replacing worn blades is a simple job that makes a big difference to your driving confidence.

Looking after your wipers

Looking after your wipers is easy and helps them last longer. Clean the glass regularly with a proper glass cleaner to remove dirt and grime that can wear the rubber. Also wipe the blades themselves with a damp cloth to remove dust and debris. Sun and dust can dry out and crack the rubber over time, so parking in the shade when you can is a good habit. And do not forget to check your washer fluid regularly, as a good supply helps keep the screen clear.

When you clean your windscreen, lift the wiper arms off the glass gently. This lets you clean underneath and prevents the blades from sitting in water. But be careful not to let the arms snap back onto the glass, as that can damage the blade or the windscreen. If you are replacing blades, follow the instructions for your arm type. And always make sure the blades are not stuck to the glass with ice or dirt before you turn them on.

Wiper blade tips

  • Check your wiper blades every few months for wear and tear.
  • Clean your windscreen and blades regularly to help them last.
  • Replace blades in pairs, even if only one looks worn.
  • Lift the wiper arm gently when cleaning or changing blades.
  • Use washer fluid designed for your climate and season.
  • If you see streaks or hear squeaks, it is time for new blades.

Frequently asked questions

How do I know which generation my Audi RS3 is?

Check the year of manufacture and the body style (sedan or hatch). The generations are 2022-2026 (GY) and 2015-2020 (8V). Your registration papers or VIN can confirm the year. If you are still unsure, compare your car's shape to the descriptions in this guide.

Why are the driver and passenger side sizes different?

The windscreen is not symmetrical, so each side needs a different length blade to clear the glass properly. That is why we list them separately. Always match the blade to the side, and do not swap them.

My car has a rear wiper. What size do I need?

Only the hatch versions of both generations have a rear wiper. The 2022-2026 (GY) Hatch and the 2015-2020 (8V) Hatch both take a 13 inch (325 mm) rear blade. The sedans do not have a rear wiper.

How often should I replace my wiper blades?

There is no fixed rule, but most blades need replacing when they show signs of wear, such as streaking, smearing, squeaking, or visible damage. Check them regularly and replace as soon as performance drops. In harsh conditions, they may need changing more often.

Can I just replace the rubber instead of the whole blade?

Some blades allow you to replace just the rubber, but it depends on the design. For simplicity and reliability, replacing the whole blade is often easier. Check your blade type and follow the manufacturer's guidance.

What should I do if my new blades squeak?

Squeaking can happen if the blades are not fitted correctly or if the glass is dirty. Clean the glass and blades first. If the noise continues, check that the blade is securely attached and matches the arm type. Sometimes a new blade needs a little time to settle in.

More Audi wiper blade sizes

If you can't find your car in the list, please scroll down to ensure you haven't missed it. If you're not 100% sure, select the option you think is closest. A photo of the car will be shown to help you confirm if it's the correct model. If you still can't find your car, please fill out the form below with your vehicle details and we'll respond shortly.

Enter valid email address!

Your name, Email Address and Correct Answer of QUIZ is required field!

Please do not use HTML tags.

Thank you for your inquiry. We will check and get back to you shortly.