🖤 BF20 FOR 20% OFF, NO MINIMUM SPEND · BF30 FOR 30% OFF, MIN $200 SPEND 🖤

Audi RS Q3 Wiper Blade Sizes

This guide is for everyday Audi RS Q3 owners who want to replace their windscreen wiper blades without any fuss. It covers the two generations of this model and gives you the driver side, passenger side and rear blade sizes for each one. You do not need any technical knowledge to use it. Just find your generation, note the sizes, and you are ready to shop with confidence.

The sizes differ between the two generations. That means a blade that fits one generation may not fit the other. So it is worth taking a moment to work out which generation your car is before you buy anything. Getting this right is the single most important step, and it saves you time and a second trip.

Use the guide in order. First, read the generation descriptions and match yours to the years shown. Then read the how-to-choose section to confirm your generation and match each side. After that, the sections on when to replace and care will help you keep your wipers working well for longer. The tips and questions at the end cover the small things people often ask about.

Audi RS Q3 wiper sizes for each generation

Audi RS Q3 2019-2026 (F3)

Audi RS Q3 2019-2026 (F3) wiper blades
Driver side25″625 mm
Passenger side20″500 mm
Rear16″400 mm

Push-button arm. The blade has a small push button that releases it from the end of your wiper arm.

Shop 2019-2026 (F3) wiper blades

For this generation, the driver side blade is 25 inch (625 mm) and the passenger side blade is 20 inch (500 mm). The rear wiper takes a 16 inch (400 mm) blade. Fit each blade to its own side, because the two front sizes are not the same. Before you start, lift the wiper arm gently away from the glass so you have room to work, and take care not to let it snap back down onto the windscreen.

Audi RS Q3 2014-2018 (8U)

Audi RS Q3 2014-2018 (8U) wiper blades
Driver side24″600 mm
Passenger side21″525 mm
Rear16″400 mm

Push-button arm. The blade has a small push button that releases it from the end of your wiper arm.

Shop 2014-2018 (8U) wiper blades

This generation uses a 24 inch (600 mm) blade on the driver side and a 21 inch (525 mm) blade on the passenger side. The rear wiper uses a 16 inch (400 mm) blade. Keep the driver and passenger blades separate as you unpack them, since they are different lengths. When fitting, hold the new blade squarely against the arm and check it clicks into place before you lower the arm back to the glass.

How to work out which Audi RS Q3 you have

To work out which generation you have, look at the years shown for each one and compare them with your car's details. Your registration papers or the vehicle's build information will tell you the year. The generation label in brackets, F3 or 8U, can also help if you have seen it on your paperwork. Once you are sure of the generation, you can trust the sizes listed for it.

Next, match each side. The driver side and passenger side blades are different lengths, so buy one of each rather than two of the same. If your car has a rear wiper, add the rear size too. Lay the new blades out and label them before you begin, so you do not mix up the driver and passenger sides halfway through the job.

How to fit your new wiper blades

Push-button arm

The blade has a small push button that releases it from the end of your wiper arm.

  1. Lift the wiper arm away from the windscreen until it stays upright.
  2. Press and hold the push button on the blade connector, then slide the blade off the end of the arm.
  3. Slide the new blade on until the button clicks back into place.
  4. Gently lower the arm back onto the glass.

When to replace your wiper blades

Worn wiper blades show themselves in small ways at first. You may see streaks of water left behind after each sweep, or a thin film that smears across the glass. Sometimes the blades squeak or judder as they move. These are all signs that the rubber has started to wear and is no longer clearing the screen cleanly.

Look closely at the rubber edge as well. If it is split, cracked or coming away from the blade, it needs replacing. A blade in this state can leave patches of the windscreen unclear, which is exactly where you need to see. Do not wait for a heavy downpour to discover the problem.

Good visibility in rain matters for safe driving. Blades that streak or smear make it harder to spot other cars, pedestrians and road markings. Replacing worn blades is a simple job that makes a real difference to how clearly you can see, so it is worth doing as soon as you notice the signs.

Looking after your wipers

Look after your wipers and they will look after you. Clean the glass regularly, because dirt and grime wear the rubber edge faster. Wipe the blade itself with a damp cloth now and then to remove dust and grit. Sun and dust both take a toll on rubber over time, so parking in shade where you can helps.

When you clean the windscreen, lift the wiper arms off the glass so you can reach underneath. Be gentle and do not let them spring back. Check your washer fluid too, and top it up when it runs low, since a good spray helps the blades clear the screen. A little care like this keeps your wipers working smoothly.

Wiper blade tips

  • Check your generation before you buy any blades.
  • Buy one driver side and one passenger side blade, as the sizes differ.
  • Label each new blade before fitting so you do not mix up the sides.
  • Lift the arm gently and never let it snap back onto the glass.
  • Wipe the rubber edge with a damp cloth to remove grit.
  • Replace blades at the first sign of streaking or squeaking.

Frequently asked questions

How do I know which generation my RS Q3 is?

Compare the year of your car with the years listed for each generation in this guide. Your registration papers or build information will show the year. Once you have matched it, use the sizes given for that generation.

Are the driver and passenger blades the same size?

No. The driver side and passenger side blades are different lengths on both generations. Buy one of each rather than two of the same, and keep them separate as you fit them.

Does my car have a rear wiper?

Both generations listed in this guide include a rear wiper, and each takes a 16 inch (400 mm) blade. Check the rear of your car to confirm, then add that size to your order.

Why do the sizes differ between generations?

The sizes differ between the two generations, so a blade that fits one may not fit the other. That is why it is worth confirming your generation before you buy anything.

What are the signs that my blades need replacing?

Watch for streaking, smearing, squeaking or judder as the blades sweep. Split or cracked rubber is another clear sign. If the screen is not clearing cleanly in rain, it is time for new blades.

Can I fit the blades myself?

Yes. Lift the arm gently off the glass, release the old blade, and click the new one into place. Take your time, keep the driver and passenger blades separate, and check each one is secure before lowering the arm.

More Audi wiper blade sizes

If you can't find your car in the list, please scroll down to ensure you haven't missed it. If you're not 100% sure, select the option you think is closest. A photo of the car will be shown to help you confirm if it's the correct model. If you still can't find your car, please fill out the form below with your vehicle details and we'll respond shortly.

Enter valid email address!

Your name, Email Address and Correct Answer of QUIZ is required field!

Please do not use HTML tags.

Thank you for your inquiry. We will check and get back to you shortly.