🖤 BF20 FOR 20% OFF, NO MINIMUM SPEND · BF30 FOR 30% OFF, MIN $200 SPEND 🖤

Audi Q8 e-tron Wiper Blade Sizes

This guide is for everyday Audi Q8 e-tron owners who want to replace their windscreen wiper blades but do not know where to start. It covers the wiper blade sizes for your vehicle, how to work out which generation you have, and how to fit and look after the blades. You do not need any technical knowledge to use it. Everything here is written in plain English for Australian drivers.

Wiper blade sizes can differ between generations of the same model, so it is important to match the sizes to your exact vehicle. This guide lists the sizes for each generation so you can find the right blades for your car. Sizes are given for the driver side and passenger side, and for the rear where your vehicle has one.

Use this guide by first finding your vehicle's generation, then noting the driver side and passenger side sizes. Match each side carefully when you buy. Read the fitting notes for your generation, and check the signs of worn blades and the care tips so your wipers keep working well in Australian weather.

Audi Q8 e-tron wiper sizes for each generation

Audi Q8 e-tron 2023-2026 (F1)

Audi Q8 e-tron 2023-2026 (F1) wiper blades
Driver side26″650 mm
Passenger side20″500 mm
Rear16″400 mm

Push-button arm. The blade has a small push button that releases it from the end of your wiper arm.

Shop 2023-2026 (F1) wiper blades

For this generation, the driver side blade is 26 inch (650 mm) and the passenger side blade is 20 inch (500 mm). There is also a rear blade at 16 inch (400 mm). When fitting, take care to seat each blade firmly on its arm until it clicks into place, then give it a gentle tug to confirm it is secure. Match each side to its listed size before you buy, and check the blades sit flat against the glass after fitting.

How to work out which Audi Q8 e-tron you have

To work out which generation you have, check your vehicle's build details or the year it was made and compare that with the generation listed here. The years shown for each generation are the simplest guide. If you are unsure, look at your current blades and compare their lengths with the sizes listed, or ask your local parts supplier to confirm the right fit for your car.

Once you know your generation, note the driver side and passenger side sizes separately. They are not the same, so buy one blade for the driver side and one for the passenger side to match. If your vehicle has a rear wiper, note that size too. Matching each side correctly means the blades sweep the glass properly and clear rain evenly.

How to fit your new wiper blades

Push-button arm

The blade has a small push button that releases it from the end of your wiper arm.

  1. Lift the wiper arm away from the windscreen until it stays upright.
  2. Press and hold the push button on the blade connector, then slide the blade off the end of the arm.
  3. Slide the new blade on until the button clicks back into place.
  4. Gently lower the arm back onto the glass.

When to replace your wiper blades

Worn wiper blades show clear signs. You may see streaks of water left behind after each sweep, or smears that make the glass harder to see through. Some blades squeak or judder across the glass. Others leave patches of water that never clear. These are all signs the rubber has worn and the blade is no longer doing its job.

Look closely at the rubber edge of each blade. If it is split, cracked, or torn, or if pieces are missing, replace it. A blade that has lost its flexibility will not press evenly against the glass. Even if the blade looks fine, poor visibility in rain is a strong reason to replace it. Do not wait for a completely failed blade before acting.

Good visibility in rain matters for safe driving. Worn blades can leave you guessing about the road ahead, especially in heavy rain or at night. Replacing worn blades is a simple job that makes a real difference to how clearly you see. Check your blades regularly and replace them when the signs appear.

Looking after your wipers

Look after your wipers by cleaning the glass and the blades regularly. Dirt and grime on the glass wear the rubber faster. Wipe the blade edge with a damp cloth to remove dust and grit. When you clean the windscreen, lift the arms off the glass so you can reach the full blade. Be gentle and do not let the arm snap back onto the glass.

Sun and dust wear rubber over time, so park in shade where you can and keep the glass clean. Check your washer fluid regularly and top it up so you can clear the glass when needed. In dry, dusty conditions, give the blades a wipe more often. These small habits help your wipers last longer and work better.

Wiper blade tips

  • Check your generation before buying blades.
  • Match the driver side and passenger side sizes separately.
  • Lift the wiper arm gently when cleaning the glass.
  • Wipe the blade edge to remove dust and grit.
  • Replace blades when they streak, smear, or squeak.
  • Top up your washer fluid regularly.

Frequently asked questions

How do I know which generation my Q8 e-tron is?

Check your vehicle's build details or the year it was made and compare that with the generation years listed in this guide. If you are still unsure, compare the length of your current blades with the sizes shown, or ask your local parts supplier to confirm the right fit.

Are the driver and passenger blades the same size?

No. For this vehicle the driver side and passenger side use different sizes. Always note each side separately and buy the correct blade for each. Matching each side properly helps the blades clear the glass evenly.

Does my Q8 e-tron have a rear wiper?

This generation does have a rear wiper, and its size is listed in the generation section. Check that your vehicle has one before buying a rear blade. If it does, match the listed rear size when you buy.

How often should I replace my wiper blades?

There is no fixed number in this guide. Replace them when you notice streaks, smears, squeaks, judder, or split and cracked rubber. Poor visibility in rain is a clear sign to act. Check your blades regularly so you spot wear early.

Can I fit the blades myself?

Yes, fitting is a simple job. Follow the arm type shown for your generation and seat each blade firmly until it clicks. Give it a gentle tug to confirm it is secure. If you are unsure, ask your local parts supplier for help.

What should I do if my wipers squeak?

Squeaking often means the rubber has worn or the blade is not sitting flat. Clean the glass and the blade edge first. If the noise continues, replace the blade. Squeaking blades can also smear the glass and reduce your visibility in rain.

More Audi wiper blade sizes

If you can't find your car in the list, please scroll down to ensure you haven't missed it. If you're not 100% sure, select the option you think is closest. A photo of the car will be shown to help you confirm if it's the correct model. If you still can't find your car, please fill out the form below with your vehicle details and we'll respond shortly.

Enter valid email address!

Your name, Email Address and Correct Answer of QUIZ is required field!

Please do not use HTML tags.

Thank you for your inquiry. We will check and get back to you shortly.