Audi e-tron Wiper Blade Sizes
This guide is for everyday Audi e-tron owners who want to replace their windscreen wiper blades but are not sure which sizes to buy. It covers the wiper blade sizes for the driver side, the passenger side and the rear window for the generation listed here. You do not need any technical knowledge to use it. Just read the details for your car and match the sizes when you shop.
Wiper blade sizes can differ between generations of the same model. That is why it is important to check which generation your Audi e-tron belongs to before you buy anything. Buying the wrong size can mean poor contact with the glass, which affects how well your wipers clear the rain. This guide lists the sizes for the generation covered so you can get it right the first time.
Start by confirming your generation using the years shown. Then note the driver side, passenger side and rear sizes for that generation. When you shop, match each size to the correct side of the car. Take a moment to check the wiper arm type too, because it tells you how the blade attaches. If anything is unclear, check your owner's manual or ask your parts supplier before ordering.
Audi e-tron wiper sizes for each generation
Audi e-tron 2021-2023 (GE)
.png)
Push-button arm. The blade has a small push button that releases it from the end of your wiper arm.
Shop 2021-2023 (GE) wiper bladesFor this generation, the driver side takes a 26 inch (650 mm) blade and the passenger side takes a 20 inch (500 mm) blade. The rear window takes a 13 inch (325 mm) blade. When fitting, take care to seat each blade firmly on the arm and check it clicks into place before you lower it. It also helps to compare the new blade with the old one before removal so you can match the fitting direction.
How to work out which Audi e-tron you have
To work out which generation you have, look at the model year of your Audi e-tron and compare it with the years listed in this guide. The generation code can also help you confirm. If you are still unsure, check the paperwork that came with the car or look for the build details on the vehicle. Once you are confident about the generation, you can use the sizes given for it.
Next, match each blade to the correct side. The driver side and passenger side often need different lengths, so do not assume they are the same. Note the driver side size and the passenger side size separately, and note the rear size as well. When you buy, check that each blade matches the size for its side. Fitting the wrong length can leave gaps on the glass or cause the blade to catch.
How to fit your new wiper blades
Push-button arm
The blade has a small push button that releases it from the end of your wiper arm.
- Lift the wiper arm away from the windscreen until it stays upright.
- Press and hold the push button on the blade connector, then slide the blade off the end of the arm.
- Slide the new blade on until the button clicks back into place.
- Gently lower the arm back onto the glass.
When to replace your wiper blades
Worn wiper blades show themselves in several ways. You may see streaks of water left behind after each pass. The blade may smear rather than clear the glass, or leave a film that makes it harder to see. Some worn blades squeak or judder across the windscreen. Others leave patches of water that never quite clear. Any of these signs means it is time to think about replacement.
It also pays to look closely at the rubber itself. If the edge is split, cracked or torn, the blade cannot wipe cleanly. A blade that has lost its flexibility may skip across the glass instead of gliding over it. Even if the rubber looks fine, poor visibility in rain is a strong signal that something needs attention. Do not wait for a completely failed blade before you act.
Good visibility matters for safe driving. Rain, spray and road grime can build up quickly, and worn blades make it harder to see the road, other cars and pedestrians. Clear glass helps you react sooner and reduces strain on your eyes. Replacing worn blades is a small job that makes a real difference to your safety and comfort in wet weather.
Looking after your wipers
Look after your wiper blades and they will serve you better. Clean the glass regularly so the blades are not dragging over grit and dirt. Wipe the rubber edge with a damp cloth now and then to remove dust and grime. Sun and dust wear rubber over time, so parking in shade where you can helps. When you clean the windscreen, lift the arms off the glass carefully and lower them gently.
Check your washer fluid regularly and top it up when it runs low. A good spray helps the blades clear the glass without scrubbing. Avoid running the wipers on a dry windscreen, because that adds wear. In cold weather, make sure the blades are not stuck to the glass before you switch them on. A little care each month keeps your wipers working well for longer.
Wiper blade tips
- Check your generation before buying any blades.
- Match each blade to the correct side of the car.
- Compare the new blade with the old one before fitting.
- Clean the glass and the rubber edge regularly.
- Replace blades at the first sign of streaking or squeaking.
- Top up washer fluid so the blades can work properly.
Frequently asked questions
How do I know which generation my Audi e-tron is?
Check the model year of your car and compare it with the years listed in this guide. The generation code can also help you confirm. If you are unsure, your owner's manual or the paperwork that came with the car should tell you.
Are the driver and passenger blades the same size?
No. For this generation, the driver side and passenger side take different sizes. Always note each side separately when you shop, and check that each blade matches the size for its side before fitting.
Does this model have a rear wiper?
Yes. This generation has a rear wiper, and the guide gives the rear blade size for it. Check the rear size along with the driver and passenger sizes when you order your blades.
How do I fit the new blades?
Lift the wiper arm off the glass and release the old blade using the push button on the arm. Then seat the new blade firmly and check it clicks into place. Lower the arm gently and test the wipers before driving.
How often should I replace my wiper blades?
There is no fixed number in this guide. Instead, watch for signs of wear such as streaking, smearing, squeaking, judder or split rubber. Replace the blades when you notice these signs or when visibility in rain gets worse.
Can I replace just one blade?
It is best to check all the blades together. If one is worn, the others may be close behind. Matching each side to the correct size and replacing worn blades as a set helps keep your view clear in wet weather.
More Audi wiper blade sizes
- Audi A1 Wiper Blade Sizes
- Audi A3 Wiper Blade Sizes
- Audi A4 Wiper Blade Sizes
- Audi A5 Wiper Blade Sizes
- Audi A6 Wiper Blade Sizes
- Audi A7 Wiper Blade Sizes
- Audi A8 Wiper Blade Sizes
- Audi Q2 Wiper Blade Sizes
- Audi Q3 Wiper Blade Sizes
- Audi Q4 e-tron Wiper Blade Sizes
- Audi Q5 Wiper Blade Sizes
- Audi Q7 Wiper Blade Sizes