Mazda CX-5 Wiper Blade Sizes

This guide is for everyday Mazda CX-5 owners who want to replace their windscreen wiper blades but are not sure where to start. It covers the two CX-5 generations and the correct blade sizes for the driver side, passenger side and rear window. You do not need any technical knowledge to use it. Just find your generation, note the sizes, and you are ready to shop.

Wiper blade sizes can differ between generations of the same vehicle, so it is worth checking which generation you have before buying. The two CX-5 generations in this guide are listed with their own sizes. Getting the right size for each side matters for a clean, quiet wipe and good visibility in the rain.

Start by working out which generation your CX-5 belongs to. Then look at the sizes listed for that generation and match them to the driver side, passenger side and rear window. Each side can take a different size, so treat them separately. If you are unsure, check your vehicle details before ordering.

The guide also explains how to choose the right blades, when to replace worn ones, how to care for your wipers, and answers common questions. Everything here uses only the facts supplied for your CX-5, so you can order with confidence.

Mazda CX-5 wiper sizes for each generation

For this generation, the driver side takes a 24 inch (600 mm) blade and the passenger side takes an 18 inch (450 mm) blade. The rear window takes a 14 inch (350 mm) blade. Fit each blade to its matching side and check that it clicks securely into place before you lower the arm. Take a moment to lift the arm gently and confirm the new blade sits flush against the glass.

This generation uses a 24 inch (600 mm) blade on the driver side and an 18 inch (450 mm) blade on the passenger side. The rear window uses a 14 inch (350 mm) blade. When fitting, line up the new blade with the arm and press it on firmly until it is seated. Give it a gentle tug to make sure it is secure, then lower the arm slowly onto the glass.

How to work out which Mazda CX-5 you have

To work out which generation you have, check the year your CX-5 was built and compare it with the two ranges in this guide. The generation label in brackets can also help you confirm it. Once you know your generation, note the driver side, passenger side and rear sizes listed for it. Do not assume the sizes are the same across both generations.

When ordering, match each blade to the correct side. The driver side and passenger side often need different sizes, and the rear window has its own size. Buy one blade for each position rather than assuming a single size fits all. If you are unsure which side is which, sit in the driver seat and picture the windscreen in front of you.

When to replace your wiper blades

Worn wiper blades show themselves in everyday driving. You may see streaks of water left behind after each swipe, or a smear that makes the glass harder to see through. Some blades squeak or judder across the windscreen. Others leave patches that clear slowly. These are all signs that the rubber is no longer doing its job.

Look closely at the blade edges too. Split or cracked rubber, or bits of rubber coming away, mean it is time for a new set. A blade that has lost its flexibility will not press evenly against the glass. If you notice any of these signs, replace the blades rather than waiting for a completely clear view to disappear.

Good visibility in rain matters for safe driving. Streaks, smears and poor clearing can hide other vehicles, pedestrians and road markings. Replacing worn blades is a simple job that helps you see clearly when the weather turns. Do not put it off until the next service.

Looking after your wipers

Look after your wipers and they will look after you. Clean the glass regularly to remove dust and grime, and wipe the blade edges with a damp cloth now and then. Sun and dust wear down the rubber over time, so parking in shade where you can helps. When you clean the windscreen, lift the arms off the glass gently rather than yanking them.

Check your washer fluid regularly and top it up so you can clear the glass when you need to. Never lift the arms and let them snap back onto the glass, as this can damage the blades. If you are fitting new blades, wipe the arm end clean first. A little care keeps the rubber soft and the wipe quiet.

Wiper blade tips

• Check your generation before ordering any blades.
• Match each blade to the correct side.
• Replace blades in pairs when they wear.
• Wipe the glass and blade edges regularly.
• Lift the arms gently, never let them snap back.
• Top up washer fluid so you can clear the screen.

Frequently asked questions

How do I know which CX-5 generation I have?

Check the year your CX-5 was built and compare it with the two ranges in this guide. The generation label in brackets can also help. Once you know your generation, use the sizes listed for it for the driver side, passenger side and rear window.

Are the driver and passenger blades the same size?

No. On both generations in this guide, the driver side and passenger side take different sizes. Always match each blade to its own side rather than buying two of the same size. The rear window also has its own size.

Does my CX-5 have a rear wiper?

Yes. Both generations listed in this guide show a rear size, so your CX-5 has a rear wiper. Use the rear size given for your generation when you replace it, and fit it the same way as the front blades.

How often should I replace my wiper blades?

There is no fixed number here. Replace them when you notice streaks, smears, squeaking, judder, or split and cracked rubber. If your view in the rain is poor, new blades are a simple fix. Check them regularly rather than waiting for a set date.

Can I fit the blades myself?

Yes, fitting blades is a simple job for most owners. Lift the arm gently, release the old blade, and press the new one on until it is secure. Give it a gentle tug, then lower the arm slowly onto the glass. Take care not to let the arm snap back.

What should I do if my new blades squeak?

Clean the glass and wipe the blade edges with a damp cloth. Dust and grime can cause noise. Check that each blade is seated firmly on its arm. If the noise continues, look at the rubber for wear or damage and replace the blade if needed.

More Mazda wiper blade sizes

• Mazda 3 Wiper Blade Sizes