Chery Omoda 5 Wiper Blade Sizes
This guide is for everyday Chery Omoda 5 owners who want to replace their windscreen wiper blades but are not sure where to start. You do not need to know anything about wipers to use it. It walks you through the sizes for your car, how to work out which version you have, and how to keep your blades in good shape so you can see clearly in the rain.
Wiper sizes can differ between generations of the same model, so it is worth checking which generation your Omoda 5 belongs to before you buy anything. This guide covers the generations listed below and gives the driver side, passenger side and rear sizes where they apply. Take a moment to match your car to the right generation first, then use the sizes shown for that generation.
Read the generation section that matches your car, then look at the how-to-choose section if you are unsure which one you have. Each generation lists the driver side and passenger side sizes, and the rear size where a rear wiper is fitted. Once you have your sizes, the care and replacement sections will help you get the most from your new blades and know when it is time to change them.
Chery Omoda 5 wiper sizes for each generation
Chery Omoda 5 2022-2026

Push-button arm. Your wiper arm uses a push-button-type connector, and the blade supplied is made for it.
Shop 2022-2026 wiper bladesFor the 2022-2026 Omoda 5, the driver side blade is 25 inch (625 mm) and the passenger side blade is 18 inch (450 mm). A rear wiper is also fitted, and it takes a 14 inch (350 mm) blade. When you fit the new blades, take a moment to check that each one sits flat against the glass and moves freely across the screen before you drive off.
How to work out which Chery Omoda 5 you have
To work out which generation you have, check the build details for your Omoda 5, such as the model year shown on your paperwork or the plate on the car. The generations are listed by year range, so match your car to the range it falls into. If you are still unsure, your vehicle identification number or a quick check with a parts specialist can confirm it for you.
Once you know your generation, match each side separately. The driver side and passenger side often take different sizes, so buy one blade for the driver side and one for the passenger side using the sizes listed for your generation. If your car has a rear wiper, pick the rear size shown for that generation too. Fitting the wrong size on either side can leave patches of glass you cannot see through.
How to fit your new wiper blades
Push-button arm
The blade has a small push button that releases it from the end of your wiper arm.
- Lift the wiper arm away from the windscreen until it stays upright.
- Press and hold the push button on the blade connector, then slide the blade off the end of the arm.
- Slide the new blade on until the button clicks back into place.
- Gently lower the arm back onto the glass.
When to replace your wiper blades
Worn wiper blades usually show themselves in small ways first. You might see streaks of water left behind after each sweep, or a smear that makes the glass look greasy in the rain. Sometimes the blades squeak or judder across the screen, or the rubber looks split, cracked or ragged along the edge. Any of these signs means it is time to think about new blades.
It is easy to put up with tired wipers, but poor visibility in rain is a real safety issue. Streaks and smears can hide pedestrians, cyclists and other cars, especially in heavy rain or at night when glare spreads across the glass. Clear glass helps you react sooner and stay calm in bad weather, so replacing worn blades is a small job with a big payoff.
Check your blades regularly rather than waiting for a stormy day. Run your hand gently along the rubber to feel for splits or hard spots, and look at the glass after a sweep to see what is left behind. If the blades are noisy, leave lines, or no longer clear the screen properly, fit new ones. Fresh blades are one of the simplest ways to keep your Omoda 5 safe in the wet.
Looking after your wipers
Looking after your wipers starts with clean glass. Dirt, dust and grit on the windscreen wear the rubber every time the blades sweep, so wash the glass regularly and wipe the blade edges with a damp cloth. Sun and dust also dry out and harden the rubber over time, so parking in shade where you can helps your blades last longer.
When you clean the glass, lift the wiper arms off the windscreen so you can reach the full surface and the blades themselves. Be gentle and do not let the arms snap back onto the glass. It is also worth checking your washer fluid regularly, because a good spray helps the blades clear the screen and reduces wear. A little care each month keeps your wipers working well.
Wiper blade tips
- Check your wiper sizes against your generation before buying.
- Replace both front blades at the same time for even clearing.
- Wipe the blade edges with a damp cloth when you wash the car.
- Lift the arms gently when cleaning and never let them snap back.
- Top up your washer fluid so the blades can do their job.
- If one blade streaks or squeaks, check the other side too.
Frequently asked questions
How do I know which generation my Omoda 5 is?
Check the model year on your registration or vehicle paperwork and match it to the year range in this guide. If you are unsure, your vehicle identification number or a parts specialist can confirm the generation for you before you buy blades.
Do the driver side and passenger side take the same size?
No. For the Omoda 5 covered here, the driver side and passenger side take different sizes. Always match each side separately using the sizes listed for your generation so both blades clear the glass properly.
Does my Omoda 5 have a rear wiper?
The 2022-2026 Omoda 5 listed in this guide has a rear wiper, and it takes a 14 inch (350 mm) blade. Check the rear blade for splits and smearing along with the front ones when you inspect your wipers.
How do I fit the new blade to the arm?
The Omoda 5 uses a push-button arm. The blade has a small push button that releases it from the end of your wiper arm. Press the button, ease the old blade off, then click the new one into place and check it is secure.
How often should I replace my wiper blades?
There is no fixed number here, so let the blades tell you. Replace them when they streak, smear, squeak or judder, or when the rubber looks split or cracked. Checking them regularly helps you catch wear before a rainy day.
Can worn wipers really affect safety?
Yes. Worn blades leave streaks and smears that reduce visibility in rain, and glare at night can spread across a poorly cleared screen. Clear glass helps you spot hazards sooner, so replacing tired blades is a simple safety step.