Bentley Continental Wiper Blade Sizes
This guide is for everyday Bentley Continental owners who want to replace their windscreen wiper blades without any fuss. It covers the two generations of this car and tells you the driver side and passenger side blade sizes for each one. You do not need to know anything about wipers to use it. Just read the section that matches your car and you will have what you need.
The two generations of the Bentley Continental use different wiper blade sizes. The sizes differ between the generations, so it is worth taking a moment to confirm which one you have before you buy anything. Getting this right means the blades will fit your car properly and clear the glass the way they should.
Start by working out which generation your car belongs to, using the years as a guide. Then find that generation below and note the driver side and passenger side sizes. Match each side carefully when you buy, and check the blades again once they are fitted. If anything looks or sounds wrong on the first rainy drive, stop and check the fitting.
Bentley Continental wiper sizes for each generation
Bentley Continental 2018-2023

Fitting details for this arm are on the product page.
Shop 2018-2023 wiper bladesFor this generation, the driver side blade is 28 inch (700 mm) and the passenger side blade is 16 inch (400 mm). The two sides are quite different in length, so keep them separate when you buy and when you fit them. Before fitting, wipe the arm and the new blade clean and make sure the blade clicks into place securely. Take a moment to check both blades sit flat against the glass before you drive away.
Bentley Continental 2004-2018

Fitting details for this arm are on the product page.
Shop 2004-2018 wiper bladesFor this generation, the driver side blade is 24 inch (600 mm) and the passenger side blade is also 24 inch (600 mm). Both sides are the same length, but it still pays to fit each one carefully and check it is seated properly. Give the glass and the arms a quick clean before you start, and make sure each blade is locked onto its arm. Then lower the arms gently onto the glass and check the fit.
How to work out which Bentley Continental you have
To work out which generation you have, look at the years your car was built. The newer generation covers 2018-2023 and the older one covers 2004-2018. If your car sits right at the changeover, check your paperwork or the car itself rather than guessing. Once you are sure of the generation, you can look up the correct sizes with confidence.
Then match each side on its own. On the newer generation the driver side and passenger side blades are different lengths, so buy one of each. On the older generation both sides are the same length. Always say driver side and passenger side when you order, and check each blade against the glass after fitting.
When to replace your wiper blades
Worn wiper blades show themselves in small ways at first. You may see streaks or smears left across the glass after each sweep. The rubber can squeak or judder as it moves. Sometimes the blade leaves patches of water behind instead of clearing them cleanly. These are all signs that the blades are no longer doing their job well.
Look closely at the rubber too. It can split, crack or go hard over time, and a blade with damaged rubber will not clear the glass properly. If you notice any of these signs, it is time to replace the blades. Do not wait for a heavy downpour to find out that your wipers are struggling.
Good visibility in rain matters for safe driving. Blades that streak or smear leave you guessing about the road ahead, and that is the last thing you want in poor weather. Replacing worn blades is a simple job that makes a real difference to how clearly you can see. It is worth doing as soon as you spot the signs.
Looking after your wipers
Look after your wipers and they will look after you. Clean the glass regularly so the blades are not dragging over dirt and grit. Wipe the rubber edge of each blade with a damp cloth now and then to remove grime. Strong sun and dust wear the rubber over time, so a little care helps the blades last.
When you wash the car, lift the arms off the glass so you can clean underneath them, then lower them gently rather than letting them snap back. Check your washer fluid regularly and top it up when it runs low, because a good spray helps the blades clear the glass. Never let the arms drop onto bare glass.
Wiper blade tips
- Check which generation your Bentley Continental is before you buy any blades.
- On the newer generation, the driver side and passenger side blades are different lengths.
- On the older generation, both sides use the same length blade.
- Wipe the arm and the new blade clean before fitting.
- Lower the arms gently onto the glass, never let them snap down.
- Replace blades at the first sign of streaking, smearing or squeaking.
Frequently asked questions
How do I know which generation my Bentley Continental is?
Use the years your car was built as a guide. The newer generation covers 2018-2023 and the older one covers 2004-2018. If you are unsure, check your paperwork or the car itself before ordering, so you get the right sizes.
What sizes does the newer generation use?
For the 2018-2023 generation, the driver side blade is 28 inch (700 mm) and the passenger side blade is 16 inch (400 mm). The two sides are different lengths, so buy one of each and fit them to the correct side.
What sizes does the older generation use?
For the 2004-2018 generation, the driver side blade is 24 inch (600 mm) and the passenger side blade is also 24 inch (600 mm). Both sides are the same length, so you can buy two blades of that size.
How often should I replace my wiper blades?
Replace them whenever you notice streaking, smearing, squeaking or juddering, or if the rubber looks split or cracked. Do not wait for a rainy day to find out they are worn. A quick check now and then keeps you ahead of it.
Can I fit the blades myself?
Yes, fitting wiper blades is a simple job you can do at home. Clean the arm and the new blade first, then make sure the blade clicks securely into place. Lower the arm gently onto the glass and check the fit before you drive.
Why do the sizes differ between the two generations?
The sizes differ between the generations, so the blades that suit one car may not suit the other. Always check which generation you have and match the driver side and passenger side sizes for that generation before you buy.